The CR-V uses Honda’s indirect tire pressure monitoring system, which learns how your tires normally roll. After any tire work, you need to start a calibration so it relearns. It takes a minute in the menu and finishes while you drive.
Quick Answer
Set all tires to the door-label pressure, stop in Park with the power ON, then select Home > Vehicle Settings > TPMS Calibration > Calibrate on the touchscreen, or use the driver information interface on 7-inch models. Calibration completes automatically while driving. Some 2014-2017 CR-Vs use a TPMS button under the left side of the dashboard instead: hold it until the indicator blinks twice.
Key Takeaways
- Calibrate after adjusting pressures, rotating or replacing tires.
- The CR-V’s system compares wheel rotation rather than reading pressure in each tire.
- 2023+ models calibrate from the Vehicle Settings menu.
- Some older models use a TPMS button under the dashboard.
When to Calibrate

- After adding or releasing air in any tire.
- After a tire rotation.
- After replacing one or more tires, or fitting winter wheels.
- If the low tire pressure/TPMS indicator is on after you have set correct pressures.
Note: Set the cold pressures from the door label before calibrating. The system treats the current state as normal, so calibrating with a low tire defeats it. See CR-V tire pressure.
Products Worth Considering
The Tymate TM12 RV TPMS delivers real-time tire pressure and temperature monitoring with a stable 433Hz display for safer long-distance driving. It supports simultaneous monitoring across vehicle and trailer zones, includes six alarm modes for pressure, temperature, leakage, battery, and signal loss, and features easy DIY installation with auto calibration. Power is supplied via USB-C charging or solar recharging, with a wide 0–144 PSI range and up to 50 ft signal coverage for RVs and towable trailers.
Replace worn or malfunctioning GM TPMS sensors with this 433MHz pre-programmed sensor set designed for compatibility with many Chevrolet, Buick, GMC, and Cadillac models. It includes guidance for proper OBDII relearning/pairing after installation and supports reliable long-term operation with a high-performance CR2032 battery. Quality tested for durability and performance to help restore accurate tire pressure monitoring.
Masoll TPMS sensors are designed for most GM vehicles after 2006, helping you clear tire pressure warnings with OEM-level 315/433MHz compatibility. The 4-pack includes pre-programmed sensors, but re-learning is required after installation using a GM TPMS relearn tool or scan tool. Built with a dual-antenna design and a long-life CR2050 battery, these sensors deliver reliable performance in extreme temperatures with corrosion-resistant valve construction.
Steps for 2023 and Newer CR-Vs
| Screen | Steps |
|---|---|
| 9-inch touchscreen | Press Home, select Vehicle Settings, select TPMS Calibration, then Calibrate |
| 7-inch models (driver information interface) | Press the Home button, select Settings, then Vehicle settings; scroll to TPMS calibration and select Calibrate |
- Stop the vehicle, shift to Park and set power ON.
- Follow the steps for your screen.
- If ‘Calibration failed to start’ appears, repeat the final step.
- Drive normally; the calibration finishes on its own.
Honda’s owner information for its indirect systems says calibration needs about 30 minutes of cumulative driving at 30-60 mph to complete.
Older CR-V Methods
An American Honda job aid lists two start methods for earlier models. The 2014-2016 CR-V (except Touring) and 2017 CR-V LX use the TPMS button underneath the left side of the dashboard: press and hold until the indicator blinks twice. The 2017 CR-V (except LX) starts calibration from the Display Audio touchscreen settings. Check your manual for the method on your model.
Products Worth Considering
This TPMS relearn tool helps you quickly activate, match, and reset GM tire pressure sensors to keep the vehicle monitoring system working properly. It clears tire pressure alarms and dashboard warning lights after sensor replacement or tire rotation, and supports learning for common 315/433 MHz TPMS sensors. Designed for simple one-button operation, it can help you avoid unnecessary trips to repair shops.
Masoll M13 TPMS monitors tire pressure across RV and trailer applications and helps protect safety on the road. Set your reference pressure for auto alarm triggers, while the system automatically calibrates as you inflate or deflate. Solar charging with intelligent sleep/wake keeps operation efficient, and the color LCD provides clear readings in day or night driving.
The Tymate TM2 RV tire pressure monitoring system keeps you informed with a color LCD display, automatic backlight, and solar charging for dependable operation. It supports up to 10 tire positions with four pre-paired sensors, while offering multiple alarm modes for fast leak detection, pressure extremes, temperature alerts, and low-signal warnings. Built-in monitoring uses accurate readings and reliable 433.92MHz communication to help protect your RV, trailer, truck, or SUV.
Troubleshooting a Light That Stays On
- Re-check every tire with a gauge; the system only warns when one tire is significantly low.
- Make sure all four tires are the same size and type; mixed tires can confuse the system.
- A compact spare or tire chains can turn on the indicator.
- If the indicator blinks and then stays on, have a dealer check for a fault.
See TPMS warning lights explained for what each symbol means.
Frequently Asked Questions
How do I reset the tire pressure light on a 2024 Honda CR-V?
Set the pressures, then select Home > Vehicle Settings > TPMS Calibration > Calibrate. The calibration finishes while you drive.
Where is the TPMS button on a Honda CR-V?
On 2014-2016 models (except Touring) and the 2017 LX it is underneath the left side of the dashboard. Newer CR-Vs use the settings menu.
How long does CR-V TPMS calibration take?
Honda says about 30 minutes of cumulative driving at 30-60 mph.
Does the CR-V have TPMS sensors in each wheel?
US CR-Vs use Honda’s indirect system, which uses wheel-speed data rather than pressure sensors in each wheel.
Sources
- Honda owner’s information: TPMS calibration steps
- Honda owner’s information: calibration driving time
- American Honda job aid: understanding indirect TPMS (NHTSA)
- Honda Info Center: 2024 CR-V tire pressure indicator reset
Products Worth Considering
This TPMS sensor training and relearn reset tool is customized for Ford, Lincoln, and Mercury vehicles to help activate tire pressure programming after sensor replacement or tire rotation. It can activate individual tire pressure sensors with one-button operation, helping prevent TPMS warning light illumination. It is not a sensor programming tool and cannot program replacement sensors—use it to trigger/activate sensors only.
The TYAMATE TM8 solar-powered wireless TPMS delivers real-time tire pressure and temperature monitoring with six alarm modes for safer driving. A vibrant color LCD display shows readings clearly while windshield mounting keeps it hands-free and easy to read. With a wide 0–87 PSI range, strong 433.92 MHz signal transmission, and quick sensor pairing, it’s ideal for RV, sedan, SUV, MPV, and truck use.
Autel MX TPMS sensors combine 315MHz and 433MHz in a single easy-to-install press-in design for faster tire service. They support wireless programming with strong signal performance, and the sensors are clone-able for streamlined replacement. Built for reliability and tested to SAE standards, each sensor includes a series number for quality control.








