Honda CR-V Bolt Pattern: 5×114.3 Specs for Every Generation

The CR-V has kept the same basic wheel fitment for a long time, which makes winter wheels and aftermarket sets easy to find. There is one wrinkle with some overseas versions of the newest model. Here are the specs.

Quick Answer

US-market Honda CR-Vs, including the 2023-2026 sixth generation, use a 5×114.3 bolt pattern with a 64.1 mm center bore and M12 x 1.5 lug nuts. Factory wheels run 17 to 19 inches with high positive offsets. Some European-market sixth-generation CR-V hybrids are listed with 5×120 and M14 x 1.5 instead, so check imported vehicles.

Key Takeaways

  • US CR-V: 5×114.3, 64.1 mm bore, M12 x 1.5.
  • Factory wheels: 17 to 19 inches; offsets roughly +40 to +55 mm.
  • Shares the 5×114.3 / 64.1 mm fitment with the Civic and Accord.
  • Some European sixth-gen hybrids are listed at 5×120.

CR-V Wheel Fitment Specs

SUV wheel hub with studs and a hub-centric ring
Generation Model years Bolt pattern Center bore Lug thread
2nd-3rd gen 2002-2011 5×114.3 64.1 mm M12 x 1.5
4th gen 2012-2016 5×114.3 64.1 mm M12 x 1.5
5th gen 2017-2022 5×114.3 64.1 mm M12 x 1.5
6th gen (US) 2023-2026 5×114.3 64.1 mm M12 x 1.5
6th gen (some European hybrids) 2023- 5×120 64.1 mm M14 x 1.5

Fitment data for 2017-2020 CR-Vs lists stock offsets of 50 to 55 mm on 17×7 to 18×7.5 wheels, and 2023-2025 US models carry the same 5×114.3 pattern and 64.1 mm hub bore.

Products Worth Considering

Which Wheels Fit?

  • Civic and Accord wheels: share 5×114.3 and 64.1 mm; check width, offset and load rating for the heavier CR-V.
  • Pilot, Passport, Ridgeline wheels: use 5×120 and do not fit a US CR-V.
  • Toyota RAV4 wheels: 5×114.3 but a 60.1 mm bore, too small for the CR-V hub.
  • Aftermarket wheels: often bored larger; fit hub-centric rings to 64.1 mm.

Warning: A wheel must carry the CR-V’s weight. Check the wheel’s load rating as well as bolt pattern, especially on lightweight wheels designed for cars.

Offset and Tire Size

Factory offsets are high positive. Lower-offset wheels push the tire outward and can rub the fender liner at full lock. Keep the overall diameter close to stock so the TPMS, ABS and speedometer stay accurate; our CR-V tire size guide lists factory sizes. For basics see what a bolt pattern is.

Products Worth Considering

After Fitting New Wheels

Torque nuts to 80 lb-ft (CR-V lug nut torque), set pressures, and calibrate the TPMS, because the indirect system must relearn rolling radius with a new wheel and tire combination.

Frequently Asked Questions

What is the bolt pattern on a 2025 Honda CR-V?

The US-market 2025 CR-V uses 5×114.3 with a 64.1 mm center bore and M12 x 1.5 lug nuts.

Did the CR-V bolt pattern change in 2023?

Not for US models, which kept 5×114.3. Some European-market sixth-generation hybrids are listed with 5×120.

Will Accord wheels fit a CR-V?

They share bolt pattern and center bore, but check offset, width and load rating before fitting them to the heavier CR-V.

Do I need hub-centric rings on a CR-V?

Only if the wheel’s center bore is larger than 64.1 mm, which is common with aftermarket wheels.

Sources

  1. Element Wheels: 2023-2025 Honda CR-V fitment
  2. Limitless Tire: 2023 Honda CR-V wheel and tire sizes
  3. Wheel-Sizes: Honda CR-V wheel specs by year
  4. TireWheelGuide: 2023 Honda CR-V by market
  5. Santa Ana Wheel: Honda factory wheel guide

Products Worth Considering

Sharing Is Caring:
About the Author

Cole Mitchell

Cole Mitchell is TubeTyre's Toyota SUV and truck tire specialist, covering the RAV4, Tacoma, 4Runner and Hyundai Sonata in depth. His work focuses on fitment and plus-sizing, tire pressure and rotation schedules, alignment and vibration troubleshooting, and seasonal tire choices for daily drivers. Cole also contributes maintenance, safety and performance guides that explain how tire choice changes handling, braking and ride comfort on the road.

Leave a Comment

Your email address will not be published. Required fields are marked *