Ford’s 6×135 bolt pattern is unusual. Most other half-ton pickups use 6×139.7, so F-150 wheels do not swap with Chevy, GMC, Ram or Toyota trucks. Here is the F-150’s fitment by generation and what to check before buying wheels.
Quick Answer
F-150s from 2004 to 2026 use a 6×135 mm bolt pattern with an 87.1 mm hub bore. 2015 and newer trucks use M14 x 1.5 studs, while 2004-2014 trucks use M14 x 2.0. Older 1997-2003 F-150s use 5×135. The Lightning EV and Raptor also use 6×135.
Key Takeaways
- 2004-2026 F-150: 6×135 mm, 87.1 mm hub bore.
- 2015+ studs: M14 x 1.5; 2004-2014: M14 x 2.0.
- 1997-2003 F-150: 5×135 with M12 studs on most trucks.
- 6×135 does not match the 6×139.7 used by most other half-ton trucks.
F-150 Wheel Fitment by Generation

| Model years | Bolt pattern | Stud thread | Hub bore |
|---|---|---|---|
| 1997-2003 (most) | 5×135 | M12 x 1.75 | See wheel maker |
| 2004-2014 | 6×135 | M14 x 2.0 | 87.1 mm |
| 2015-2020 | 6×135 | M14 x 1.5 | 87.1 mm |
| 2021-2026 (incl. Lightning, Raptor) | 6×135 | M14 x 1.5 | 87.1 mm |
Fitment specialists list 2015-2020 trucks with a 6×135 pattern, an 87 mm hub bore and M14 x 1.5 nuts, and the 2015 model on 17-inch factory wheels with an 87.1 mm center bore. Every 2025 trim uses 6×135.
Note: Some heavy-duty payload versions of earlier F-150s used seven-lug wheels. If you have an older truck, count the studs before buying wheels.
Products Worth Considering
These M14x1.5 closed-end chrome lug nuts are a one-piece replacement designed for secure fitment on compatible GM, Ford, and select Chrysler/Dodge models. Featuring a 60-degree conical seat and anti-rust chrome plating, they help resist corrosion and maintain a bright look for everyday driving. Built for long-term durability, they include OEM-style part references and are backed by 12 months of support.
Upgrade your wheels with MIKKUPPA closed-end lug nuts designed for reliable fit and corrosion resistance. The one-piece, cold-forged and heat-treated steel construction helps resist rust and stripping, while the integrated finish delivers a durable black appearance. Built to OEM standards with a conical 60-degree seat, these nuts provide a secure solution for compatible Ford, Honda, Jeep, and Chevrolet models.
This spare tire tool kit is designed for the 2004 to 2018 Ford F-150 to help you loosen and tighten wheel lug nuts and manage the spare tire and provided jack functions from underneath the vehicle. It includes the lug nut wrench and extension pieces plus a convenient storage carrying case for organized transport. The jack itself is not included.
Will Other Truck Wheels Fit?
- Chevy, GMC, Ram, Toyota half-tons: use 6×139.7 (6×5.5 in), which does not fit 6×135.
- Ford Expedition and Lincoln Navigator (2015-on): share 6×135 with an 87.1 mm bore; check offset and load rating.
- Bronco Raptor: uses 6×135 wheels that some aftermarket makers also list for the F-150.
- Adapters: 6×139.7-to-6×135 adapters exist, but they add offset and stress; use hub-centric, rated parts only.
Warning: Truck wheels must carry the truck’s axle load. Check the load rating stamped on any aftermarket wheel, especially if you tow.
Offset, Size and Clearance
Factory F-150 wheels sit at positive offsets in the mid-30s to mid-40s mm. Many aftermarket truck wheels use zero or negative offset to push the tire out, which can rub at full lock or on lifted trucks. Keep the tire diameter close to stock unless you recalibrate the speedometer; see our F-150 tire size guide and how to measure a lug pattern.
Products Worth Considering
Upgrade your wheels with MIKKUPPA M12x1.5 mag seat lug nuts built for secure, corrosion-resistant performance. These closed-end chrome lug nuts are a direct replacement for select Toyota models, including Camry, Corolla, RAV4, Sienna, Avalon, Highlander, Matrix, Venza, and Prius. Triple-chromium plating and cold-forged, heat-treated steel help deliver strength for daily driving and replacement needs.
Masoll TPMS sensors are designed for most GM vehicles after 2006, helping you clear tire pressure warnings with OEM-level 315/433MHz compatibility. The 4-pack includes pre-programmed sensors, but re-learning is required after installation using a GM TPMS relearn tool or scan tool. Built with a dual-antenna design and a long-life CR2050 battery, these sensors deliver reliable performance in extreme temperatures with corrosion-resistant valve construction.
This TPMS sensor training and relearn reset tool is customized for Ford, Lincoln, and Mercury vehicles to help activate tire pressure programming after sensor replacement or tire rotation. It can activate individual tire pressure sensors with one-button operation, helping prevent TPMS warning light illumination. It is not a sensor programming tool and cannot program replacement sensors—use it to trigger/activate sensors only.
After Fitting New Wheels
Torque the nuts to 150 lb-ft (F-150 lug nut torque), transfer or install TPMS sensors and train them to the truck (F-150 TPMS reset). See installing TPMS sensors on aftermarket wheels for details.
Frequently Asked Questions
What is the bolt pattern on a Ford F-150?
2004-2026 F-150s use 6×135 mm with an 87.1 mm hub bore. 1997-2003 trucks mostly use 5×135.
Will Chevy wheels fit an F-150?
No. Chevy and GMC half-tons use 6×139.7, which does not match the F-150’s 6×135 pattern.
What thread are F-150 lug nuts?
2015 and newer F-150s use M14 x 1.5. 2004-2014 trucks use M14 x 2.0.
Do Expedition wheels fit an F-150?
Recent Expedition wheels share 6×135 and an 87.1 mm bore, but check offset, size and load rating first.
Sources
- Element Wheels: 2015-2020 Ford F-150 fitment
- ThreePiece: 2015 Ford F-150 fitment specs
- TireWheelGuide: 2025 Ford F-150 sizes and bolt pattern
- CarTipsDaily: F-150 lug nut and bolt pattern by year
- Ford 2013 F-150 owner’s manual: wheels and tires
Products Worth Considering
This professional wheel and rim brush kit makes it easy to lift brake dust, grime, and dirt from wheels and tires without scratching finishes. The brushes feature soft, metal-free wool heads and a flexible 360-degree rim brush design for reaching hard-to-clean areas. Includes multiple brush types plus accessories for thorough car, motorcycle, and general vehicle detailing.
This 1/2-inch drive breaker bar delivers powerful leverage for loosening and tightening stubborn lug nuts and automotive fasteners. The 180-degree flex head helps you reach tight spaces at the angle you need, making tire and brake jobs easier. A spring-loaded ball detent design holds 1/2-inch sockets securely while the chrome-moly head provides durable strength for everyday use.
The Trivd Frol 1/2" air impact wrench delivers high performance torque up to 1500 ft-lbs with a twin hammer impact mechanism for strong, balanced blows. It features an ergonomic grip, compact lightweight design, and quick-stop control with 3 forward speeds up to 8000 RPM plus a reverse speed. Built for demanding automotive repair and tire shop work, the rear exhaust helps keep debris away from the surface.








