Tire Size Calculator: Compare Two Tire Sizes

Enter your current tire size and the size you are considering. The calculator compares overall diameter, width, sidewall height and revolutions per mile, and shows how far off your speedometer would read. Sizes use the standard metric format, for example 225/65R17.

Width (mm)Aspect ratio (%)Wheel (in)

How the numbers are calculated

A size like 225/65R17 means the tire is 225 mm wide, the sidewall is 65% of that width, and it fits a 17-inch wheel. Sidewall height = width × aspect ratio ÷ 100. Overall diameter = wheel diameter (converted to mm) + two sidewalls. Revolutions per mile = 1,609,344 mm ÷ circumference. Your speedometer is calibrated to the original diameter, so a larger tire makes it read low and a smaller tire makes it read high.

Before you change tire size

  • The calculator gives nominal dimensions. Real tires of the same size vary slightly between brands and models, so check the maker’s spec sheet for the exact diameter.
  • Keep the load index and speed rating at or above what your vehicle’s door-jamb placard lists.
  • Make sure the new width is approved for your wheel width, and check clearance at full steering lock and suspension compression.
  • On all-wheel-drive vehicles, all four tires should match in diameter.