Honda CR-V Lug Nut Torque: 80 ft-lb Spec and How to Tighten

The CR-V uses the same wheel nut torque as most Honda cars, which makes tire changes simple. Getting it right still matters: too loose and a wheel can come off, too tight and you risk damaged studs and warped rotors.

Quick Answer

The Honda CR-V’s wheel nut torque is 80 lb-ft (108 N·m, 11 kgf·m). The 2013 CR-V owner’s manual lists 80 lbf-ft, and fitment data for the 2023 CR-V gives M12 x 1.5 nuts torqued to 108 N·m. Tighten in a crisscross pattern with a torque wrench and re-check after 50 to 100 miles. Most CR-V nuts take a 19 mm socket.

Key Takeaways

  • CR-V wheel nut torque: 80 lb-ft (108 N·m).
  • Studs are M12 x 1.5 on US CR-Vs.
  • Tighten in a crisscross pattern in two or three passes.
  • Don’t use an impact gun for final tightening.

CR-V Wheel Nut Torque by Generation

torquing lug nuts on a compact SUV wheel
Generation Model years Torque Thread
2nd gen 2002-2006 80 lb-ft (108 N·m) M12 x 1.5
3rd gen 2007-2011 80 lb-ft (108 N·m) M12 x 1.5
4th gen 2012-2016 80 lb-ft (108 N·m) M12 x 1.5
5th gen 2017-2022 80 lb-ft (108 N·m) M12 x 1.5
6th gen (US) 2023-2026 80 lb-ft (108 N·m) M12 x 1.5

Honda specifies 80 lb-ft (108 N·m) for the 2013 CR-V on both steel and alloy wheels, and fitment data for the 2023 CR-V lists the same 108 N·m. Confirm the figure in your owner’s manual, especially if you have aftermarket wheels or a non-US model.

Note: Some European-market sixth-generation CR-V hybrids are listed with a different hub (5×120, M14 x 1.5). If you have an imported CR-V, check its own manual for torque.

Products Worth Considering

How to Tighten CR-V Lug Nuts

  1. Start each nut by hand.
  2. Snug them in a crisscross pattern with the wheel off the ground.
  3. Lower the vehicle so the tire carries weight.
  4. Torque each nut to 80 lb-ft in the same pattern.
  5. Make a second pass to confirm.
  6. Re-check after 50 to 100 miles.

Warning: As Honda’s manuals warn for its cars, do not over-tighten the nuts by standing on the lug wrench or using a pipe for extra leverage.

Socket, Locks and Aftermarket Wheels

Most factory CR-V nuts take a 19 mm socket. Wheel locks need their key, and aftermarket wheels may need nuts with a different seat. For fitment details see CR-V bolt pattern.

Products Worth Considering

After Fitting the Wheels

Set pressures to the label values in our CR-V tire pressure guide and calibrate the TPMS. Honda says the system must be calibrated whenever tires are rotated or replaced.

Frequently Asked Questions

What is the lug nut torque for a Honda CR-V?

80 lb-ft (108 N·m, 11 kgf·m) for US CR-V models across recent generations.

What socket size do CR-V lug nuts use?

Most factory CR-V lug nuts take a 19 mm socket.

Is the torque different for the CR-V Hybrid?

US CR-V Hybrids use the same M12 x 1.5 studs and 80 lb-ft figure. Check your manual to confirm.

Do I need to re-torque after a tire rotation?

Re-checking after 50 to 100 miles is good practice after any wheel removal.

Sources

  1. TP Auto Repair: 2013 Honda CR-V wheel nut torque
  2. Limitless Tire: 2023 Honda CR-V wheel and tire sizes
  3. Honda CR-V spec reference: torque by generation
  4. TireWheelGuide: 2023 Honda CR-V by market

Products Worth Considering

Sharing Is Caring:
About the Author

Cole Mitchell

Cole Mitchell is TubeTyre's Toyota SUV and truck tire specialist, covering the RAV4, Tacoma, 4Runner and Hyundai Sonata in depth. His work focuses on fitment and plus-sizing, tire pressure and rotation schedules, alignment and vibration troubleshooting, and seasonal tire choices for daily drivers. Cole also contributes maintenance, safety and performance guides that explain how tire choice changes handling, braking and ride comfort on the road.

Leave a Comment

Your email address will not be published. Required fields are marked *