Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
A loose spare tire can waste valuable trailer space, block access to cargo, and become difficult to manage during loading. The E Track Spare Tire Holder Mount moves the wheel onto an existing E-Track wall system using a double-fitting steel bracket and a bolt-based retainer. Its main strengths are quick repositioning and a more stable two-point connection than a basic single-fitting hanger. However, you still need to confirm wheel clearance, bolt length, E-Track condition, and the safe load limits of your complete installation before using it on the road.
Quick Verdict
Rating: 8/10, Recommended with caveats
Best For: Enclosed-trailer, box-truck, van, and workshop owners who already use securely installed E-Track.
Bottom Line: The double-fitting design is compact, easy to reposition, and useful for clearing floor space. The main tradeoff is that the listing does not provide a verified working load limit, so fit and installation safety require careful checking.
Key Specifications
| Specification | Detail |
|---|---|
| Product type | E-Track spare tire holder mount |
| Listing identifier | Amazon ASIN B0CP13TGR1 |
| Mounting design | Double E-Track fittings with a replaceable through-bolt |
| Primary material | High-density steel |
| Bolt options | 4-inch and 6-inch bolt lengths for different wheel depths |
| Included hardware | Mounting bracket, two bolt lengths, washers, nuts, and tire-retaining hardware |
| Track compatibility | Standard E-Track rails and compatible E-Track anchor slots |
| Common locations | Enclosed trailers, box trucks, vans, garages, workshops, and warehouses |
| Important limitation | No verified working load limit was available during this review |
Key Takeaways
- The double-fitting bracket uses two E-Track engagement points to reduce movement at the rail.
- Two supplied bolt lengths help accommodate wheels with different depths, but they do not confirm every bolt pattern or tire size.
- The steel mount can be installed, removed, or repositioned without permanently dedicating one track slot.
- The safe capacity depends on the holder, hardware, E-Track rail, rail fasteners, wall structure, and vehicle conditions.
- This is best treated as an E-Track storage and transport accessory, not as a universal spare tire carrier for every wheel.
Before You Buy: The 4-inch and 6-inch measurements refer to bolt length, not four-lug or six-lug wheel compatibility. Measure the wheel opening, wheel depth, available wall clearance, and your installed E-Track spacing before ordering.
What Is the E Track Spare Tire Holder Mount?
The E Track Spare Tire Holder Mount is a removable steel bracket designed to hold a spare wheel against a wall-mounted E-Track system. Instead of leaving the tire on the trailer floor, you lock the two fittings into adjacent track slots and secure the wheel over the projecting bolt with the supplied retaining hardware.
The product is aimed at owners who already have E-Track in an enclosed trailer, work van, box truck, garage, or warehouse. Its main selling point is the double-fitting design, which spreads contact across two engagement points and gives the bracket a broader connection than a typical single-fitting holder.
The included 4-inch and 6-inch bolts let you choose a length that better matches the depth of your wheel. That flexibility is useful, but it does not guarantee that every center opening, lug opening, offset, tire width, or wall layout will fit.
Who Should Buy It?
Best For
- You already have structurally mounted E-Track and want to reclaim trailer floor space.
- You need a spare wheel holder that can be moved to another track position without drilling a new carrier location.
- You store or transport a wheel whose opening and depth work with the supplied retaining bolts.
Skip If
- You do not have E-Track or your rail is attached only to thin wall paneling.
- You need a carrier with a clearly published working load limit for a heavy commercial wheel.
- Your wheel cannot sit flat against the mounting area without contacting trim, doors, cargo, or electrical equipment.
[Products Worth Considering]
Mount your spare tire directly to the inside wall of an enclosed trailer or garage to save space and keep your tire secure. This wall-mount spare tire carrier is designed for universal trailer tire fit and includes a fixed plate and chute for convenient screw replacement. Nylon insert hex lock nuts help prevent the tire from falling off, and wing hardware enables faster load and unload during maintenance.
Mount your spare tire off the floor and onto your wall using an e-track spare tire carrier that helps you stay organized in trailers, garages, and warehouses. The upgraded double-fittings design improves stability versus single-fittings and supports greater load bearing. Install by snapping into e-track anchor points and securing the tire with a lug-nut style bolt setup for quick, secure storage.
This universal spare tire mount fits 4, 5, and 6 lug trailer wheels with bolt patterns from 4" to 5.5" and helps keep your tire securely locked in place. Its reinforced triangular structure with a sturdy behind plate is designed to handle up to 150 lbs, making it suitable for boat, camper, and RV spare tire mounting. The angled raised design reduces wind resistance and installation is straightforward with different length bolts and no drilling required.
Double-Fitting Design and Stability
The bracket locks into two E-Track points instead of relying on one fitting. This wider connection can reduce twisting and side-to-side play at the mount, especially when compared with compact single-point holders. It also helps keep the bracket aligned while you place the wheel over the bolt.
That does not make the holder stronger than the rail or wall supporting it. During travel, the tire creates dynamic forces from bumps, braking, and cornering. Your complete setup is only as strong as its weakest part, including the rail fasteners and the structure behind the wall.
| Feature | What It Does | Buyer Benefit |
|---|---|---|
| Double E-Track fittings | Uses two rail engagement points | Less bracket movement and easier wheel alignment |
| Steel bracket | Provides a rigid base for the retaining bolt | Compact support without a large floor-mounted frame |
| Replaceable bolt length | Lets you select the shorter or longer supplied bolt | Better adjustment for different wheel depths |
Fit and Compatibility
The mount is intended for standard E-Track rails or compatible single-slot E-Track anchors. Before buying, confirm that the double fitting can engage both required slots at the position you plan to use. Obstructions, track joints, damaged slots, or nearby hardware may prevent full engagement.
Wheel fit requires more than knowing the tire diameter. Check the opening that will pass over the retaining bolt, the depth from the wheel face to the back of the tire, and the space needed for the washer and nut. Also confirm that the tire will not press against a door, shelf, wiring run, window, or loaded cargo.
Do not assume that the two bolt lengths mean the mount supports a specific number of wheel lugs. The product uses one retaining bolt, so you need to test the actual wheel opening and mounting position rather than relying only on a four-lug, five-lug, or six-lug label.
Materials and Build Quality
The holder uses a high-density steel bracket with a treated exterior finish. Steel gives the mount the rigidity needed to hold the bolt and resist ordinary flex during installation. The compact shape also leaves more usable wall and floor space than a large fixed carrier.
The finish should reduce direct exposure of bare steel, but it is not a reason to ignore maintenance. Road salt, trapped moisture, chipped coating, and metal-to-metal contact can still cause corrosion. Inspect the bracket, fittings, bolt, washers, and nuts regularly, especially after winter travel or wet storage.
How to Install the Spare Tire Holder on E-Track
- Inspect the rail: Make sure the E-Track is firmly attached to suitable structural support and that the chosen slots are not bent, cracked, or obstructed.
- Select the bolt: Choose the 4-inch or 6-inch bolt based on the depth of the wheel and the amount of thread needed for the retaining hardware.
- Prepare the bracket: Pass the bolt through the bracket’s through-hole and secure the inner hardware as directed by the product instructions.
- Lock in both fittings: Press the fitting levers, seat the bracket in the rail slots, and confirm both keepers fully engage.
- Mount the wheel: Lift the wheel onto the bolt through a suitable opening without forcing the rim against the bracket.
- Install the retainer: Add the washer and retaining nut or wing nut, then tighten until the wheel is secure without damaging the wheel.
- Check clearance: Confirm that the tire does not block doors, interfere with cargo, or contact sharp edges.
- Reinspect: Check the mount after the first trip and during routine pre-trip inspections.
Pro Tip: Test the installation with the trailer parked before loading other cargo. Mark the track position that gives you enough room to remove the spare without unloading the entire trailer.
Compatibility and Safety
A spare wheel is a concentrated load, and road movement can multiply the force applied to the bracket. Do not use the holder until you have confirmed the safe ratings and installation requirements for the mount, E-Track rail, rail fasteners, and supporting wall structure. A strong-looking rail can still fail if it is fastened only to decorative paneling.
The product listing did not provide a verified working load limit during this review. That makes it especially important to compare your wheel’s actual weight with written guidance from the seller or manufacturer. For commercial use, oversized tires, or uncertain wall construction, have the installation checked by a qualified trailer or upfitting professional.
Keep the retaining hardware tight, but avoid over-tightening against a finished wheel. Follow the supplied instructions and any vehicle, trailer, or E-Track manufacturer requirements. Use additional restraint when required by your transport setup or local rules.
How It Performs in Real Use
In an Enclosed Cargo Trailer
This is the mount’s strongest use case. Moving the spare to the wall clears floor area for equipment and reduces the need to shift the tire whenever you load cargo. The removable fitting also lets you reposition the wheel when your trailer layout changes.
In a Garage or Workshop
For stationary storage, the bracket keeps a spare wheel visible and off the floor. You can sweep underneath it and avoid stacking the tire against tools or shelving. Wall clearance still matters, especially around workbenches and vehicle doors.
In a Box Truck or Work Van
The compact mount can help organize a vehicle that already uses E-Track for tools and cargo. Place the wheel where its weight will not interfere with access or upset your normal loading plan. Recheck the hardware often because commercial vehicles may experience frequent vibration and loading cycles.
When You Need a Repositionable Mount
A fixed bolt-on carrier stays in one place, while this bracket can move along compatible track. That is useful when you switch cargo types or need seasonal storage changes. The tradeoff is that every new position must provide full fitting engagement, safe wall support, and enough clearance.
Pros and Cons
Pros
- Double fittings provide two E-Track contact points.
- Moves the spare tire off the floor to improve cargo access.
- Includes 4-inch and 6-inch bolts for different wheel depths.
- Can be removed or repositioned without drilling a new carrier location.
- Steel construction keeps the bracket compact and rigid.
Cons
- No verified working load limit was available during this review.
- Wheel fit depends on the opening, depth, offset, and surrounding clearance.
- Safe road use depends heavily on how the E-Track rail is attached to the wall structure.
Maintenance and Long-Term Use
Inspect the E-Track keepers, bolt threads, washers, and nuts before trips. Replace hardware that is bent, heavily corroded, stripped, or difficult to tighten. Clean dirt and road salt from the bracket, then dry it before storing the vehicle for long periods.
Also watch the rail and wall around the mount. Elongated fastener holes, loose screws, cracked paneling, or movement behind the rail can signal a structural problem. Remove the wheel and correct the issue before using the holder again.
Is It Worth the Price?
This mount offers strong value for buyers who already own an E-Track system and want a compact, repositionable spare tire solution. You receive the double-fitting bracket and two bolt lengths, so the product addresses both wall attachment and basic wheel-depth adjustment without requiring a large carrier frame.
It is worth considering if your priority is freeing floor space and keeping the spare accessible. It is not the best fit if you need a published load rating, a vehicle-specific fit guarantee, or a permanently bolted carrier for a very heavy wheel.
[Products Worth Considering]
The GADFISH spare tire carrier is built for reliable hauling with a reinforced welded triangular structure and a behind plate that securely holds the tire up to 150 lbs. It fits a wide range of trailer wheel lug setups, making it suitable for boat trailers as well, while the sloping design helps reduce wind resistance and provides low-ground clearance. Installation is designed to be straightforward with different length bolts and no drilling required.
Secure a full-size spare on your trailer with this powder-coated steel spare tire mount bracket. It fits most 4-, 5-, and 6-lug wheel bolt patterns and mounts to trailer tongues up to 4 in wide and 5 in tall. Built for reliable carry with a max 150 lb load rating and includes zinc-plated hardware for straightforward installation.
This universal spare tire mount carrier holder is built for utility trailers and boat trailers, offering a secure fit for 4, 5, and 6 lug wheels. It supports multiple bolt pattern sizes and a heavy-duty load capacity while resisting rust with a durable finish. The design allows easy installation and lets you choose the steel beam height for a better fit.
How It Compares to Alternatives
A single-fitting E-Track holder is usually smaller, but it has only one rail connection and may allow more rotation. A fixed wall-mounted or frame-mounted carrier can provide a dedicated installation with clearer vehicle-specific hardware, but it is harder to reposition. This double-fitting mount makes the most sense when you value E-Track flexibility and already have a properly reinforced mounting surface.
For open trailers or exterior exposure, compare it with a purpose-built exterior spare tire carrier that lists its material, corrosion protection, fit range, and load rating. This E-Track model is better suited to protected interior locations unless the seller confirms otherwise.
[Products Worth Considering]
This side-mounted U-bolt spare tire bracket helps keep a trailer spare wheel secure and protected while you travel. It supports trailer frames up to 2–3 inches wide and fits up to 15-inch tires for 4- or 5-lug wheels. The galvanized steel threaded carrier is built for long-lasting corrosion resistance and installs easily with included lug nuts and U-bolt.
The Kurgo Seasonal Tire Tote helps protect your car interior, clothes, and garage from tire grime, brake dust, and residue during seasonal tire changes. Its universal design fits most passenger tires between 22" and 31" in diameter, making storage and transport simpler with less mess. Built for rugged, repeated use, it’s machine washable for easy care and comes with a lifetime warranty.
This car D-wheel lock nut key provides an anti-theft solution for D-shaped wheel lock bolts, helping keep your wheels secure. It features a flower-shaped internal pattern that resists micro-adjustment theft while allowing removal and mounting of compatible locking nuts. Made for reliable performance under high torque, it’s easy to use with standard socket wrench turning for quick tire maintenance and emergency repairs.
Frequently Asked Questions
Do the 4-inch and 6-inch bolts refer to wheel lug patterns?
No. Those measurements describe the two supplied bolt lengths. They help with different wheel depths but do not prove compatibility with every four-lug, five-lug, or six-lug wheel.
Will this mount fit every spare tire?
No universal fit can be confirmed from tire diameter alone. Measure the wheel opening, wheel depth, tire width, available thread engagement, and clearance around the proposed mounting position.
Can it be used on vertical and horizontal E-Track?
The product is primarily presented as a wall-mounted holder for E-Track systems. Confirm any horizontal or floor-track use with the seller because the load direction, clearance, and retention needs are different.
How much weight can the double fittings safely hold?
A verified working load limit was not available during this review. Do not estimate capacity from the steel bracket alone because the rail, fasteners, wall structure, and road forces all affect safe use.
Does the protective finish make it safe from road salt?
The treated finish helps protect the steel surface, but it does not make the mount maintenance-free. Clean salt and moisture away, inspect for chips or rust, and replace damaged hardware before continued use.
What is the most common installation mistake?
The biggest mistake is treating the wall panel as structural support. The E-Track must be attached with suitable hardware to a strong backing structure, and both mount fittings must fully lock into undamaged slots.
Who should skip this E-Track spare tire holder?
Skip it if you lack E-Track, cannot verify structural wall support, or need a documented capacity for a heavy commercial wheel. A fixed, rated, vehicle-specific carrier may be a better choice in those cases.
The Bottom Line
The E Track Spare Tire Holder Mount is a practical choice when you already have securely installed E-Track and want a compact way to move a compatible spare wheel off the floor. Its double-fitting design and two bolt lengths are useful strengths, but buyers who need a published load rating or guaranteed wheel fit should choose a more clearly specified carrier.
Ready to Buy?
Check the latest price, current package details, and seller specifications before you decide.
