Honda Civic Lug Nut Torque: 80 ft-lb (and When It’s 94)

For decades the Civic’s wheel nut torque has been a simple 80 lbf-ft. Recent models complicate that slightly: Honda now lists a higher figure for some manual-transmission cars and the Type R. Here is which number applies to your Civic.

Quick Answer

Honda lists 80 lbf-ft (108 N·m, 11 kgf·m) for Civic wheel nuts in owner’s manuals from 2000 through the 2010s. For the 2025 Civic, Honda’s owner information lists 80 lbf-ft for CVT models and 94 lbf-ft (127 N·m) for manual-transmission models, and the corrected 2025 manual lists 94 lbf-ft for the Type R. Most Civic nuts take a 19 mm socket.

Key Takeaways

  • Most Civics: 80 lbf-ft (108 N·m).
  • 2025 manual-transmission Civics and the Type R: 94 lbf-ft (127 N·m).
  • Tighten in a crisscross pattern, going around two or three times.
  • Honda warns not to over-tighten with your foot or a pipe.

Civic Wheel Nut Torque by Model

torque wrench, sockets and lug nuts on a workbench
Model Model years Wheel nut torque
Civic (all trims) 2000-2021 80 lbf-ft (108 N·m)
Civic CVT models 2022-2025 80 lbf-ft (108 N·m)
Civic manual transmission (e.g. Si) 2025 94 lbf-ft (127 N·m)
Civic Type R (FL5) 2023-2025 94 lbf-ft (127 N·m), per corrected 2025 manual

The 2000, 2009, 2010, 2013 and 2014 Civic manuals all give 80 lbf·ft (108 N·m, 11 kgf·m). Owners of the 2023 Type R noted that its first US manual printed 80 lbf-ft while Honda’s service information said 94; the 2025 US manual was corrected to 94.

Note: If your manual and this table disagree, follow the figure in your own owner’s manual or service information.

Products Worth Considering

How to Torque Civic Lug Nuts

  1. Thread each nut on by hand.
  2. Snug the nuts in a crisscross pattern with the wheel raised.
  3. Lower the car until the tire carries weight.
  4. Set the torque wrench to 80 or 94 lbf-ft as your model requires.
  5. Go around in the crisscross order two to three times, as Honda’s manual instructs.
  6. Re-check after 50 to 100 miles.

Warning: Honda tells owners not to over-tighten wheel nuts by applying extra torque with a foot or a pipe. Over-tightening can stretch studs and warp rotors.

Socket Size and Studs

Most Civic lug nuts take a 19 mm socket, and the studs on standard Civics are M12 x 1.5. The bolt pattern changed over the years, from 4×100 on older Civics to 5×114.3 from 2006 and 5×120 on the Type R; see Civic bolt pattern.

Products Worth Considering

After the Wheels Are Back On

Set the cold pressures from the door label, then calibrate the TPMS so it learns the new baseline. See Civic tire pressure and Civic TPMS reset.

Frequently Asked Questions

What is the lug nut torque on a Honda Civic?

Honda lists 80 lbf-ft (108 N·m) for most Civics. For 2025, manual-transmission models and the Type R are listed at 94 lbf-ft (127 N·m).

What size socket fits Civic lug nuts?

Most Civic lug nuts take a 19 mm socket.

Is the Civic Type R lug nut torque 80 or 94?

The 2025 US owner’s manual lists 94 lbf-ft for the FL5 Type R, correcting the 80 lbf-ft printed in the first US manual.

Should I re-torque Civic lug nuts?

Yes. Re-check the torque after 50 to 100 miles following any wheel removal.

Sources

  1. Honda 2014 Civic owner’s manual: wheel nut torque
  2. Honda 2000 Civic owner’s manual: wheel nut torque
  3. Honda owner’s information (2025): tire rotation and torque
  4. CivicXI forum: FL5 Type R torque and 2025 manual correction

Products Worth Considering

Sharing Is Caring:
About the Author

Cole Mitchell

Cole Mitchell is TubeTyre's Toyota SUV and truck tire specialist, covering the RAV4, Tacoma, 4Runner and Hyundai Sonata in depth. His work focuses on fitment and plus-sizing, tire pressure and rotation schedules, alignment and vibration troubleshooting, and seasonal tire choices for daily drivers. Cole also contributes maintenance, safety and performance guides that explain how tire choice changes handling, braking and ride comfort on the road.

Leave a Comment

Your email address will not be published. Required fields are marked *