Honda Civic Bolt Pattern: 4×100, 5×114.3 and Type R 5×120

The Civic has used three different bolt patterns over the years, and the Type R uses its own. Buying wheels without checking can leave you with a set that will not bolt on. Here is every pattern by generation.

Quick Answer

Most Honda Civics from 2006 to 2025 (non-Type R) use a 5×114.3 bolt pattern with a 64.1 mm center bore and M12 x 1.5 lug nuts. Civics through 2005 use 4×100 with a 56.1 mm bore. The Type R (2017-2021 FK8 and 2023+ FL5) uses 5×120.

Key Takeaways

  • 2006-2025 Civic (non-Type R): 5×114.3, 64.1 mm bore, M12 x 1.5.
  • 1988-2005 Civic: 4×100, 56.1 mm bore.
  • Civic Type R: 5×120 with a 64.1 mm bore.
  • Honda uses a 64.1 mm bore on modern models, larger than Toyota’s 60.1 mm.

Civic Bolt Pattern by Generation

five-lug aftermarket alloy wheels lined up in a shop
Generation Model years Bolt pattern Center bore Lug thread
5th-7th gen 1992-2005 4×100 56.1 mm M12 x 1.5
8th gen 2006-2011 5×114.3 64.1 mm M12 x 1.5
9th gen 2012-2015 5×114.3 64.1 mm M12 x 1.5
10th gen 2016-2021 5×114.3 64.1 mm M12 x 1.5
11th gen 2022-2025 5×114.3 64.1 mm M12 x 1.5
Type R (FK8, FL5) 2017-2021, 2023-2025 5×120 64.1 mm See manual

Fitment specialists note that every 2016-2021 Civic, from the LX sedan to the Si, runs 5×114.3 with a 64.1 mm hub bore and M12 x 1.5 studs. The FK8 Type R moved to 5×120 with 20×8.5 wheels at about +60 offset.

Products Worth Considering

Will Other Wheels Fit?

  • Accord wheels: often fit 2006+ Civics because they share 5×114.3 and 64.1 mm, if offset and width suit.
  • Toyota wheels: share 5×114.3 but have a 60.1 mm bore, too small for the Civic hub.
  • Type R wheels: do not fit standard Civics (5×120), and standard wheels do not fit the Type R.
  • Older 4×100 wheels: do not fit 2006+ Civics without adapters.

Warning: If a wheel’s center bore is smaller than 64.1 mm it will not seat on the hub. Never force it.

Offset and Size

Factory Civic offsets are high positive, around +45 to +55 on most models. Wheels with much lower offset can rub; wheels that are too wide may hit the strut. Keep the overall tire diameter close to stock; our Civic tire size guide lists factory sizes. If you are unsure of your pattern, see how to measure a lug pattern.

Products Worth Considering

After Fitting New Wheels

Torque the nuts to Honda’s figure (see Civic lug nut torque), set pressures, and calibrate the TPMS. Because the Civic’s system compares wheel speeds, a new tire size must be calibrated before it can warn accurately.

Frequently Asked Questions

What is the bolt pattern on a Honda Civic?

2006-2025 Civics (except the Type R) use 5×114.3 with a 64.1 mm center bore. Civics through 2005 use 4×100.

What bolt pattern does the Civic Type R use?

The Civic Type R uses 5×120 with a 64.1 mm center bore.

Do Accord wheels fit a Civic?

Often, on 2006 and newer Civics, because both use 5×114.3 and 64.1 mm. Check offset and width before buying.

What thread are Civic lug nuts?

Standard Civics use M12 x 1.5 lug nuts.

Sources

  1. Apex Wheels: Honda bolt pattern and center bore guide
  2. Fitment Industries: wheels for the 10th-gen Civic
  3. TP Auto Repair: what wheels fit a Honda Civic
  4. Santa Ana Wheel: Honda factory wheel guide

Products Worth Considering

Sharing Is Caring:
About the Author

Cole Mitchell

Cole Mitchell is TubeTyre's Toyota SUV and truck tire specialist, covering the RAV4, Tacoma, 4Runner and Hyundai Sonata in depth. His work focuses on fitment and plus-sizing, tire pressure and rotation schedules, alignment and vibration troubleshooting, and seasonal tire choices for daily drivers. Cole also contributes maintenance, safety and performance guides that explain how tire choice changes handling, braking and ride comfort on the road.

Leave a Comment

Your email address will not be published. Required fields are marked *