Thule Urban Glide Tire Tube Review
Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
A flat rear tire can turn an all-terrain stroller into dead weight, but buying the wrong replacement tube can create another leak before your next walk. The Thule Urban Glide Tire Tube 16, product number 20110728, is a single replacement inner tube intended for the stroller’s large 16-inch rear wheel. It uses a straight Schrader valve, so you can inflate it with a compatible bicycle or automotive-style pump. This review explains the fit checks, installation steps, real-use limits, and alternatives you should consider before ordering.
Quick Verdict
Rating: 7/10, recommended with caveats
Best For: Thule Urban Glide owners replacing one damaged 16-inch rear-wheel tube
Bottom Line: This is a simple, brand-matched replacement with a familiar Schrader valve. Its narrow purpose is also its main limitation, so you must confirm the tire markings and stroller model before installation.
Key Takeaways
- Thule identifies this replacement as product number 20110728 for the Urban Glide 16-inch wheel setup.
- The package contains one inner tube, not a tire, wheel, rim, or pair of tubes.
- The straight Schrader valve works with common pumps that support car-style valves.
- The 406 mm figure refers to the tire’s inner diameter standard, not a 406 mm tire width.
- Correct tire width, valve type, and wheel position matter as much as the 16-inch label.
| Specification | Detail |
|---|---|
| Brand | Thule |
| Product number | 20110728 |
| Product type | Replacement inner tube |
| Wheel position | Large rear wheel |
| Nominal wheel size | 16 inches |
| Diameter designation | 406 mm inner diameter standard |
| Valve | Straight Schrader valve |
| Material listing | Neoprene, according to the product listing |
| Quantity | One tube |
| Best use | Replacing a punctured or leaking compatible rear tube |
| Package note | Tire and wheel are not included |
[Products Worth Considering]
The Park Tool TL-1.2 tire lever set is narrow, strong, smooth, and versatile for easy tire removal and reliable work on bike tires. It includes a spoke hook design to help when multiple levers are needed. With Park Tool’s industry-standard reputation, this set is ideal for fast flat-fix repairs.
This heavy-duty fat bike inner tube is built for secure fit on 20-inch wheels with 3.5 to 4.0 inch wide tires, including e-bikes and mountain bikes. It uses thick butyl rubber for improved durability, air tightness, and a smoother, more comfortable ride. A standard Schrader valve makes inflation easy and helps keep pressure stable for safer rides, with tire levers included for simpler installation.
This 2-pack bicycle inner tube set is designed for kids, road, and MTB bikes with 20-inch tires in the 1.75 to 2.125 width range, using a 32mm AV Schrader valve. Each tube includes two tire levers for easier installation and safer handling while swapping tubes. Butyl rubber delivers reliable air retention, elasticity, and comfort for everyday rides.
What Is the Thule Urban Glide Tire Tube?
The Thule Urban Glide Tire Tube 16 is the inflatable inner component that sits between the stroller’s rear tire and rim. It does not replace the outer treaded tire. Once inflated, the tube supports the tire and helps the wheel roll smoothly over pavement, park paths, and other surfaces the stroller is designed to handle.
The part is most useful when your tire casing and wheel are still serviceable but the existing tube has a puncture, damaged valve, or persistent leak. Because the tube is sold individually, you can replace only the affected side instead of buying a pair.
Before You Buy: Do not rely on the words “16 inch” alone. Read the full size molded into your tire sidewall, confirm a Schrader valve, and verify that you are repairing a large rear wheel rather than the smaller front wheel.
Who Should Buy It?
Best For
- Owners replacing one punctured Thule Urban Glide rear tube
- Buyers who prefer a Thule-branded part number over a universal tube
- Anyone with a pump that supports straight Schrader valves
Skip If
- You need a front-wheel tube, outer tire, complete wheel, or two-pack
- Your tire sidewall shows a different diameter or incompatible width range
- The rim, tire bead, or valve hole is damaged and needs professional service
Fit and Compatibility
Compatibility is the most important part of this purchase. A 16-inch tire name is only a broad description, while the ETRTO-style number gives the tire’s inner diameter and width. In a marking such as 47-406, the first number is tire width in millimeters and 406 is the inner diameter that must match the rim.
Check the complete sidewall marking before removing the wheel. Replacement sellers commonly list 16-inch Urban Glide rear tubes across widths from about 1.75 to 2.125 inches, but you should match the range printed on your original tube or tire instead of assuming every 16-inch tube is interchangeable.
Pro Tip: Photograph the tire sidewall, valve, and stroller model label before ordering. Those three photos give you a quick reference when comparing the replacement listing.
Materials and Build Quality
The listing identifies the tube material as neoprene and specifies a straight Schrader valve. The valve is the practical highlight because it accepts the same general pump head used on many car tires and children’s bicycles. You do not need a Presta-only pump adapter.
An inner tube is still a wear item. Sharp debris, low pressure, a damaged rim strip, or a pinched installation can defeat even a correctly sized replacement. The tube should be judged as a repair component, not as puncture-proof protection.
How to Install the Thule Urban Glide Tire Tube
Remove your child from the stroller and work on a clean, stable surface. Follow the stroller manual for wheel removal, then release all remaining air through the Schrader valve. Ease one tire bead over the rim with your thumbs or a plastic tire lever, taking care not to scratch the rim.
| Step | What to Do | Why It Matters |
|---|---|---|
| 1 | Remove and fully deflate the wheel | Releases tension at the tire bead |
| 2 | Inspect the tire and rim | Finds thorns, glass, burrs, or rim damage that could puncture the new tube |
| 3 | Add only enough air to give the tube shape | Reduces folding and pinching |
| 4 | Insert the valve straight through the rim hole | Avoids stress at the valve base |
| 5 | Seat the tire bead by hand | Lowers the risk of trapping the tube under the bead |
| 6 | Inflate gradually and inspect both sides | Confirms the bead is even before full pressure |
Use the pressure range printed on the tire or stated in your stroller manual. Stop inflating if the bead rises unevenly, the valve leans sharply, or part of the tube appears between the tire and rim. Reinstall the wheel according to Thule’s instructions and pull-check it before placing your child back in the stroller.
How It Performs in Real Use
[Products Worth Considering]
FANSPRO’s 2-pack 26-inch bicycle inner tubes are built for reliable performance on road and mountain bikes. They fit tire widths from 2.125 to 2.40 inches and use a 48mm Schrader valve for convenient inflation. The set includes two durable tire levers to help you remove and install tubes quickly after a flat.
Replace worn tires quickly with this universal 4.80/4.00-8 tire and inner tube set designed for wheelbarrows and outdoor utility carts. The ribbed tread helps reduce turf damage while the natural rubber construction supports longer service life. Compatible with 15.5-inch outer diameter, 4-inch width, and 8-inch rim diameter wheels, it uses a straight TR-13 valve stem for easy installation. For best results, inflate with a manual pump and do not exceed 25 PSI.
This 2-pack set of 26-inch bicycle inner tubes fits tire widths from 1.75 to 2.125 and comes with a 48mm AV Schrader valve for reliable inflation. Butyl rubber construction provides strong sealing, durability, and comfort by absorbing bumps and vibrations on uneven roads. Upgraded tire levers and included installation support make swaps easier, with valves that help the tubes hold air well.
For Daily Walks
When the size and pressure are correct, the tube restores the air cushion that helps the rear tire roll smoothly. It is a practical repair for sidewalks, parks, and routine errands where the original tire and rim remain in good condition.
For Jogging and Rough Paths
Higher loads, repeated impacts, and rough surfaces make pressure checks more important. The tube can support normal stroller use, but it will not protect against sharp debris or damage caused by running underinflated.
For Travel
A single boxed tube takes little storage space, so it can serve as a spare on road trips. You will still need a compatible pump and the tools required to remove the tire bead.
For Long-Term Ownership
Long service depends more on correct fit, tire condition, and pressure than on the tube alone. If a new tube repeatedly leaks in the same location, inspect the tire casing, rim bed, and valve hole before installing another replacement.
Maintenance and Safety
Check both rear tires before walks, especially after the stroller has been stored. A soft tire can pinch the tube against the rim, while excess pressure can strain the tire and bead. Use the stroller manual or tire sidewall as your pressure reference rather than guessing.
Keep the wheel axle and attachment points clean, and confirm the wheel locks securely after service. Thule recommends regular inspection and service of stroller components. Do not use a repaired wheel if the rim is bent, the axle is loose, the tire bead will not seat, or the valve area is torn.
Common Problems and Fixes
- Immediate flat after installation: The tube may be pinched under the bead, or debris may still be inside the tire.
- Slow pressure loss: Check the valve core, valve base, and tube for a small puncture.
- Valve sits at an angle: Deflate the tube and realign it before the valve base tears.
- Tire wobbles after inflation: The bead may not be seated evenly around the rim.
- Repeated puncture in one spot: Inspect the rim strip, spoke area, and inside of the tire for a sharp edge.
Pros and Cons
Pros
- Thule-branded replacement with product number 20110728
- Correct nominal size for the large 16-inch Urban Glide rear wheel
- Common straight Schrader valve
- Single-tube package avoids paying for an unnecessary pair
- Installation is manageable with basic tire tools and careful bead seating
Cons
- Limited to compatible 16-inch rear-wheel setups
- One tube only, with no tire, wheel, pump, or levers included
- A wrong width or pinched installation can cause another flat
Is It Worth the Price?
This tube offers the most value when you want a clearly identified Thule replacement for one rear wheel. The product number and valve type reduce some of the guesswork, which can be worth paying for when you want to repair the stroller quickly.
It is less compelling when a verified universal tube in the exact same diameter, width range, and valve configuration costs less or includes two tubes. The best value depends on whether you prioritize brand matching, package quantity, or having a spare ready for the next puncture.
How It Compares to Alternatives
PramTyres sells 16-inch Urban Glide rear-wheel tubes in single and two-pack formats, while Mata1 offers a multi-brand 16-inch two-pack covering several stated width ranges. Those options may offer better quantity value, but they are universal or third-party replacements rather than Thule part 20110728.
The Thule tube makes the most sense when you want the brand’s identified replacement part. A third-party tube may be reasonable when its full size range and straight Schrader valve match your tire exactly.
Frequently Asked Questions
What size is the Thule Urban Glide Tire Tube?
It is a 16-inch rear-wheel tube associated with a 406 mm inner diameter standard. You should also match the tire width printed on your sidewall because the diameter alone does not confirm fit.
Does this tube include a valve cap?
The available product details do not clearly confirm a separate valve cap. Check the current package contents before ordering if you need one.
Can it be used with other stroller brands?
A tube may physically fit another wheel only when the diameter, supported width range, and valve type all match. This listing is identified for the Thule Urban Glide, so cross-brand compatibility is not guaranteed.
Is the tube sold individually or in pairs?
It is sold as one tube. Buy two only if you want to replace both rear tubes or keep a spare.
Does neoprene make the tube puncture-proof?
No. The listing identifies neoprene as the material, but no inner tube is immune to sharp objects, pinching, or rim damage. Correct pressure and installation remain essential.
What is the most common installation mistake?
The most common mistake is trapping the tube between the tire bead and rim. Give the tube a little shape, seat the bead by hand, and inspect both sides before raising pressure.
How does the Thule warranty claim process work?
Thule’s current process asks you to complete its online claim form, provide proof of purchase, and upload photos or video of the issue. Coverage depends on the product category, defect, purchase details, and warranty terms, so confirm eligibility directly with Thule.
The Bottom Line
The Thule Urban Glide Tire Tube 16 is a sensible choice when you need one brand-identified replacement for a compatible rear wheel. Buy it for the clear part number and common Schrader valve, but skip it if your sidewall size, valve, wheel position, or stroller model does not match.
[Products Worth Considering]
This heavy duty 20-inch bike inner tube is designed for a perfect fit across 20x1.75, 1.95, 2.10, and 2.125 tires with a Schrader valve. The tube features 20% thicker construction for improved puncture resistance and longer-lasting performance. Butyl material helps with shock absorption, and included tire levers make installation and removal easier and safer.
This Hycline 2-pack mountain bike tire set delivers durable, puncture-resistant performance with a high-grip, aggressive tread designed for traction on hard surfaces and confident handling through mud and soil. Includes matching inner tubes and tire levers for easier everyday maintenance and quicker installation after folding storage. Built for a range of riding conditions with reinforced rubber and nylon cord for wear-resistant reliability.
HEB heavy duty inner tubes deliver reliable puncture resistance for fat tire electric bikes and mountain bikes running 20x4 or 26x4 tires. Built for rugged backcountry trails, they help prevent flats from rocks and thorns while providing stability and traction. Choose a single tube or multi-packs for better value and keep your ride running smoothly in all seasons.
Related Articles
EOPOAYI 19×7-8 Mini Bike Tire Review
A rugged EOPOAYI 19x7-8 mini bike tire review reveals traction, durability, and fit details that could change your next off-road ride.
Read More
MaxAuto 16×8-7 ATV Tires Review
Jump into this MaxAuto 16x8-7 ATV Tires Review to see whether these rugged tires truly deliver on trails—and what you need to know next.
Read More
TRIBLE SIX 20×11-9 Tires Review
Built for ATVs, UTVs, mowers, and carts, TRIBLE SIX 20x11-9 tires deliver surprising traction—yet one detail may change everything.
Read More