Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Keeping tires and inflatables at the right pressure is easier when one tool can inflate, measure, and release air without repeated hose changes. The Hausse Heavy Duty Compressor Accessory Kit, model TG-28, combines a 0 to 200 PSI digital tire inflator with a metal blow gun and a broad set of tips and adapters. This review explains what is included, how the 1/4-inch NPT setup works, and where the kit is most useful. Its strongest advantage is versatility, but you still need a compatible air compressor, air hose, and the correct coupler for your setup.
Quick Verdict
Rating: 8.4/10, recommended with caveats
Best For: Home garages, DIY tire maintenance, sports equipment, and light workshop cleanup
Bottom Line: The TG-28 gives you a useful mix of tire-inflation and blow-gun accessories in a metal-bodied kit. It is a strong all-in-one add-on for an existing compressor, but it is not a portable compressor and the listing does not publish a gauge accuracy tolerance.
| Specification | Detail |
|---|---|
| Brand | Hausse |
| Model / part number | TG-28 |
| Product type | Air-compressor accessory kit with digital tire inflator and blow gun |
| Gauge range | 0 to 200 PSI |
| Connection | 1/4-inch NPT |
| Primary material | Metal, described by the listing as corrosion-resistant |
| Published item weight | About 0.63 kg (1.39 lb) |
| Included tools | Digital filling gun with valve-connector hose, metal blow gun, three nozzles or inflation tips, nine adapters plus adapter attachment, four valve-stem caps, and thread-seal tape |
| Power | Two included batteries; the main listing bullets identify them as AAA |
| Best use | Automotive tire top-offs, bicycles with compatible valves, sports balls, air mattresses, and light blow-gun work |
| Not included | Air compressor and long compressor hose |
Key Takeaways
- The TG-28 combines a digital tire inflator, pressure gauge, bleed valve, metal blow gun, and multiple inflation tips.
- The digital display covers 0 to 200 PSI and can show pressure while the tool is not actively connected to compressed airflow.
- A 1/4-inch NPT inlet makes it suitable for many shop-compressor systems, though your coupler style must still match.
- The included adapters support several household and garage tasks, but the product does not replace an air compressor.
- The manufacturer listing does not state a formal accuracy tolerance, hose length, calibration certificate, or warranty term.
What Is the Hausse TG-28?
The Hausse TG-28 is an accessory set for an air compressor, not a self-powered tire pump. Its main tool combines a digital pressure display, inflation trigger, valve-stem chuck, and vent valve so you can add air, check pressure, and bleed off excess pressure from one handheld unit.
The rest of the package broadens its use beyond tires. A separate metal blow gun and several nozzles, needles, and adapters let you inflate sports equipment and air mattresses or direct compressed air at a work surface. This makes the set most useful for someone who already owns a compressor but lacks a complete collection of basic fittings and inflation tools.
Who Should Buy It?
Best For
- Home mechanics who already own a compressor with a 1/4-inch NPT-compatible setup
- Households that inflate car tires, bicycle tires, balls, and air mattresses
- Garage users who want a pressure gauge and blow gun in one starter accessory package
Skip If
- You need a cordless or 12-volt inflator that creates its own air pressure
- You require a published professional-grade accuracy tolerance or calibration certificate
- Your compressor uses a different coupler standard and you do not want to add matching fittings
Before You Buy: This is an accessory kit for an existing air compressor. Confirm your compressor hose, quick-connect coupler, and working-pressure limits before ordering.
What’s Included in the Hausse Kit
The package centers on one filling gun with a digital gauge and valve-connector hose. The listing also identifies a metal air blow gun, three nozzles or inflation tips, nine adapters plus an adapter attachment, four tire valve-stem caps, thread-seal tape, and two batteries.
The accessory mix covers the jobs many new compressor owners encounter first. The tire chuck handles standard automotive valve stems, inflation needles work with sports balls, and tapered tips can help with common inflatables. The valve caps and thread-seal tape are small additions, but they reduce the need for a separate hardware-store trip during setup.
Package descriptions can use different names for the same tips, so compare the current listing photos with the jobs you expect to do. In particular, cyclists using Presta valves should confirm that a suitable adapter is included or plan to use a separate Presta-to-Schrader adapter.
[Products Worth Considering]
This all-in-one air compressor accessories kit includes a tire inflator with gauge for car tires and a combined air chuck setup for easier inflation. It also features a durable 1/4 inch polyurethane air hose for connecting compressors to air tools, plus a heavy-duty blow gun and industrial hose fittings for cleaning and routine projects. Ideal for keeping your air system ready for inflating, cleaning, and quick-connect tool use.
This all-in-one air compressor accessory kit combines a digital tire pressure gauge with an inflator and blow gun in a single easy-to-use unit. The heavy duty, corrosion-resistant construction helps you quickly set and read tire PSI up to 200, and the vent valve releases excess air without removing the chuck. It connects to any 1/4 inch NPT air compressor output and includes multiple nozzles, adaptors, and stem caps for versatile inflating and blowing tasks.
SARDVISA’s 22-piece air compressor accessory kit upgrades your workflow with a 25ft repairable PU air hose and a set of essential pneumatic tools. The detachable 1/4" NPT plug lets you replace damaged hose sections instead of buying a whole new line. Metal air blow gun, nozzles, couplers, and tire inflation accessories help you blow dust, debris, and inflate tires for home or workshop use.
Digital Gauge and Inflator Features
The digital inflator reads from 0 to 200 PSI. That range is more than enough for typical passenger-vehicle tires, bicycles, balls, and many light-duty inflation tasks. The display can show a pressure reading without continuous airflow from the compressor, which helps you pause, read, and adjust instead of guessing from trigger time.
A vent valve lets you release excess air while the chuck remains attached to the valve stem. This is useful when you overshoot the target by a few PSI because you can trim pressure without removing the tool and checking again with a separate gauge.
The main limitation is measurement documentation. The listing does not publish a stated accuracy percentage, calibration standard, display resolution, or operating-temperature range. For routine home use, you can compare the TG-28 against a trusted gauge when new and recheck it periodically. Buyers who need documented calibration for commercial work should choose a gauge with a published standard.
Build Quality and Connections
Hausse describes the inflator and blow gun as heavy-duty metal tools with corrosion resistance. Metal bodies generally tolerate garage use better than thin plastic housings, but the digital display, hose, seals, and threaded joints still need reasonable care. Store the kit dry, avoid dropping the gauge, and replace damaged hoses or fittings before the next use.
The air inlet uses a 1/4-inch NPT thread. NPT describes the threaded connection, not the shape of the quick-connect plug attached to your hose. Industrial, automotive, and other plug profiles can look similar but may not seal together, so match the plug and coupler pattern used by your compressor system.
Pro Tip: Assemble the NPT fitting with a small, even wrap of thread-seal tape, keeping tape back from the first thread so loose fragments do not enter the airflow path.
What It Fits and Connects To
The tire-inflator chuck is intended for common vehicle-style valve stems. That makes the kit a practical choice for cars, many light trucks, lawn equipment, and bicycles with Schrader valves. A Presta bicycle valve usually needs a separate adapter unless the current package includes one that is clearly labeled for that purpose.
The inflation needles and tapered nozzles extend the kit to sports balls, air mattresses, pool toys, and similar inflatables. Use only the pressure recommended by the item’s manufacturer. The gauge’s 200 PSI maximum does not mean every connected item can safely accept high pressure.
The blow gun is useful for clearing dust and loose debris from durable work surfaces. It is not a substitute for a purpose-built electronics duster, and compressed air should never be directed at skin, eyes, people, animals, or fragile components.
How It Performs in Real Use
For Car and Light-Truck Tire Top-Offs
The combined trigger, gauge, chuck, and vent valve reduce tool changes. Connect the chuck, read the current pressure, add air in short bursts, and bleed off excess pressure if needed. The result is a faster routine than switching between a basic air chuck and a separate pencil gauge.
For Bicycles and Sports Equipment
The included tips make the kit useful for balls and common bicycle tires, provided the valve style matches. Low-volume items can fill quickly from a shop compressor, so use short trigger presses and check pressure often. A regulator set to a sensible output pressure gives you better control than relying on trigger timing alone.
For Air Mattresses and Household Inflatables
Tapered adapters can move more air than a narrow tire chuck, which helps with mattresses and larger inflatables. The tradeoff is that a tank compressor can deliver air faster than these products need. Keep the nozzle seated, use a low regulator setting, and stop before the seams become hard or stretched.
For Workshop Cleanup
The metal blow gun can clear sawdust, dirt, and loose debris from suitable benches or parts. Its value is convenience rather than specialized cleaning performance. Wear eye protection, control the direction of debris, and use a vacuum when blowing dust would spread it into the room.
How to Set It Up and Use It Correctly
- Confirm compatibility: Check that your compressor outlet, hose, plug, and coupler match the kit’s 1/4-inch NPT connection.
- Install the fitting: Apply thread-seal tape only to the male NPT threads, then tighten the fitting without forcing or cross-threading it.
- Set the regulator: Choose an output pressure appropriate for the tire or inflatable instead of leaving the compressor at its maximum setting.
- Check the target pressure: For a vehicle, use the cold-tire pressure on the driver-door placard or owner’s manual, not the maximum number molded into the tire sidewall.
- Inflate in short bursts: Attach the chuck firmly, add air gradually, and watch the display.
- Bleed excess air: Use the vent valve if the reading rises above your target.
- Disconnect safely: Release pressure from the hose before changing threaded accessories, then store the tools clean and dry.
Compatibility and Safety
Check the working-pressure rating of every part in the air path, including the compressor, regulator, hose, couplers, adapters, and the item being inflated. The TG-28 display range is not permission to exceed the lowest-rated component. Stop using any part that leaks, cracks, bulges, or has damaged threads.
Measure vehicle tire pressure when the tires are cold and follow the vehicle manufacturer’s placard. Do not use the sidewall maximum as the normal target pressure. Keep hands and face away from damaged tires, and have a tire professional inspect any tire with a sidewall bulge, exposed cords, repeated pressure loss, or impact damage.
When using the blow gun, wear eye protection and keep bystanders away from the debris path. Never use compressed air to clean clothing or skin. Disconnect and depressurize the hose before changing fittings or performing maintenance.
Pros and Cons
Pros
- Combines inflation, pressure checking, and controlled deflation in one tool
- 0 to 200 PSI digital display covers common home and garage inflation tasks
- Metal inflator and blow-gun bodies are better suited to workshop handling than lightweight plastic tools
- Multiple tips, adapters, valve caps, batteries, and thread tape create a useful starter package
- Standard 1/4-inch NPT threading works with many compressor systems
Cons
- No published gauge accuracy tolerance or calibration standard
- Requires a separate compressor, air hose, and matching quick-connect hardware
- Presta-valve support and the exact function of every small adapter should be confirmed from current package photos
Is It Worth the Price?
The Hausse TG-28 offers strong value for the price when you need both a digital tire inflator and a starter set of compressor accessories. Buying the inflator, blow gun, inflation needles, adapters, valve caps, batteries, and thread tape separately can be less convenient, especially for a first garage setup.
You get the most value when several people or vehicles share one compressor and the extra tips will see regular use. It is less compelling for buyers who only want a high-precision tire gauge or who do not already own an air compressor. The missing published accuracy tolerance is the main reason this review stops short of an unrestricted recommendation.
[Products Worth Considering]
This SARDVISA air tool kit bundles essential compressor accessories for fast tire inflation, airflow blow-off cleaning, and pressure checks. It includes a dual head tire inflator chuck, a ball chuck for controlled airflow, a tire gauge, and multiple 1/4" NPT quick-connect fittings and air hose nozzles for versatile use. All connections are designed for reliable sealing to help reduce leaks during everyday car maintenance and dust blowing tasks.
Inflate Presta and Schrader bike and car tires with one compressor attachment, including tubeless setups. The digital gauge lets you monitor 2–200 PSI readings in 0.1 PSI increments with ±2 PSI accuracy, while the adjustable lever and built-in bleed button help you dial in precise pressure. Quick-connect coupler, hose, and a complete Presta service kit with spare cores and caps make it ready for fast maintenance.
This tire inflator with pressure gauge delivers long-lasting performance with a durable rubber-protected gauge and sturdy build. The longer hose and 360 swivel air chuck help you seal the valve securely and keep your hands free while measuring, inflating, or deflating. It’s battery-free for reliable use and provides ±2 PSI accuracy in the mid-range for most typical tires, with universal compatibility for 1/4 NPT compressor outputs.
How It Compares to Alternatives
The AstroAI ATG250 is a stronger comparison if you want a dedicated digital tire inflator with a higher 250 PSI range and more detailed published measurement specifications. The Milton S-506 is better suited to buyers who prefer a traditional service-station-style analog inflator with a long hose and a long-established tire-tool brand.
The Hausse TG-28 makes more sense when you value a broader accessory bundle. Its blow gun, adapters, needles, valve caps, and thread tape make it a more complete starter set than a stand-alone inflator gauge, though specialized alternatives may provide clearer accuracy documentation or a more refined tire chuck.
[Products Worth Considering]
AZUNO’s digital tire inflator delivers stable, accurate pressure readings with a bright LCD and a 0.1 resolution display for confident inflation. It supports one-handed operation for inflating and quick deflating, and it’s built with rugged steel and brass components for reliable shop or garage use. With multi-unit pressure display and compatibility across cars, SUVs, motorcycles, and trucks, it’s a convenient accessory for everyday tire maintenance.
Get precise tire readings with the ETENWOLF T300 Plus digital gauge, calibrated to ANSI B40.7 Grade 2A for reliable accuracy. It measures across a wide 3–200 PSI range and includes thermal compensation for dependable performance from extreme cold to heat. The bright LED display, LED illumination, and replaceable AAA batteries make it easy to check pressures quickly, even in low light.
The ETENWOLF T500 digital tire pressure gauge with inflator delivers accurate readings across a wide 0–250 PSI range, calibrated to ANSI B40.7 Grade 2A. An all-in-one tool combines gauge, air chuck, hose, inflating and controlled bleed for checking, inflating, and deflating tires on many vehicle types. It’s built for reliable use in extreme temperatures and features an illuminated backlit display with replaceable AAA batteries for convenient operation.
Frequently Asked Questions
Does the Hausse TG-28 include an air compressor?
No. It is an accessory kit that connects to an existing air compressor. You also need an air hose and compatible plug-and-coupler setup.
How accurate is the digital pressure gauge?
The listing gives a 0 to 200 PSI range but does not publish an accuracy percentage or calibration standard. Compare it with a trusted gauge before relying on it for routine tire maintenance, and choose a documented calibrated gauge for professional measurement work.
Can the gauge read pressure without the compressor running?
Yes. The product listing states that the digital PSI reading can be displayed without active connection to compressor airflow. The batteries power the display while the tire supplies the pressure being measured.
Does it work with Schrader and Presta bicycle valves?
The tire chuck is suited to standard automotive-style Schrader valves. Presta valves normally need a Presta-to-Schrader adapter, so verify the current accessory photos or plan to supply your own adapter.
What batteries does the digital gauge use?
The main listing bullets specify two AAA batteries and state that they are included. One product-description passage uses different battery wording, so confirm the current listing or battery compartment before buying replacements.
Can it inflate truck, trailer, or RV tires?
The 200 PSI display range may cover the target pressure of many tires, but the full setup must match the tire’s required pressure and volume. Confirm the compressor output, duty cycle, hose rating, chuck access, and vehicle manufacturer specification before use.
How should the kit be stored and maintained?
Wipe the tools clean, keep the display and battery compartment dry, and store the fittings where their threads cannot be damaged. Inspect the hose, chuck, seals, and threaded joints for leaks or wear before each use.
Who should choose a different inflator kit?
Choose another product if you need a self-powered portable compressor, a long-reach dual-head chuck, or certified gauge accuracy. The TG-28 is best treated as a versatile home-garage accessory bundle.
The Bottom Line
The Hausse TG-28 is a practical buy for compressor owners who want one kit for tire top-offs, sports equipment, inflatables, and light blow-gun work. Its main strength is the broad metal-bodied accessory package, while its main limitation is the lack of a published gauge accuracy tolerance. Skip it if you need a self-powered portable inflator or documented professional calibration.
Ready to Buy?
Check the latest package details, compatibility, and price before you decide.
