Pro-Line Racing Badlands MX Tire Review
Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Pro-Line Racing Badlands MX 1.9 Review for Typhon GROM 4×4
The stock Typhon GROM 4×4 tires can start to feel small once you leave smooth pavement and run on loose dirt, grass, or damp backyard ground. The Pro-Line Racing Badlands MX 1.9-inch tire and wheel set gives you a pre-mounted upgrade with a taller knobby tread and Mach-10 Black 12mm hex wheels.
This review focuses on what matters before you buy: fit, traction, setup, surface choice, durability expectations, and value. The Badlands MX set makes the most sense for loose terrain, but it is not the best pick for long pavement runs or high-speed builds that need belted tires.
Quick Verdict
Rating: 8/10
Best For: Typhon GROM 4×4 owners who want more bite on dirt, grass, mud, loam, and mixed backyard terrain.
Bottom Line: You get four pre-mounted 1.9-inch Badlands MX tires on Mach-10 Black 12mm hex wheels, so the upgrade is quick and specific to the Typhon GROM 4×4. The main tradeoff is surface focus, because this knobby tread favors loose ground over extended pavement driving.
| Specification | Detail |
|---|---|
| Brand | Pro-Line Racing |
| Model | PRO1024610 Badlands MX 1.9-inch pre-mounted buggy tire set |
| ASIN | B0DHZFCGVN |
| Product Type | Pre-mounted RC buggy tire and wheel set |
| Scale | 1/14 |
| Tire Height | 2.82 in (72mm) |
| Tire Width | 1.02 in (26mm) |
| Inner Tire / Outer Wheel Diameter | 1.9 in |
| Wheel Hex Size | 12mm |
| Wheel Design | Mach-10 Black 10-spoke wheels |
| Tread Style | Motocross-style knobby Badlands MX tread |
| Compound | Medium |
| Compatibility | ARRMA Typhon GROM 4×4, front or rear |
| Included Accessories | Four pre-mounted Badlands MX 1.9-inch tires on Mach-10 Black 12mm hex wheels |
| Best Use | Loose dirt, loam, grass, mud, and mixed backyard terrain |
| Safety Note | Check wheel-nut tightness, steering clearance, body clearance, and suspension clearance before hard driving. |
[Products Worth Considering]
This metal-free wheel and tire cleaning brush uses dense, fluffy synthetic wool to safely clean rims, spokes, fenders, and engine areas without worrying about damaging surfaces. Its flexible, comfortable design helps you reach detailed areas while maintaining durability, and the extra absorbent fibers work well with wheel spray cleaners for faster cleanup. Reusable and washable performance helps prevent grime and build-up for cleaner vehicles and easier maintenance at home.
Replace worn wheelchair rear tires with a universal 24x1 no-flat polyurethane foam option designed to mount tightly on 24-inch rims without the tire falling off. Installation is made easier with included tools and multiple methods, including using a pry bar or softening the tire in hot water to reduce resistance. The package includes two tires plus tie ropes for convenient fitting and handling.
Cristal Products Untouchable Tire Shine Spray delivers a deep, wet-look gloss that enhances your vehicle’s tires. It’s quick-drying and spreads smoothly for consistent, streak-free coverage, while forming a protective coating against UV rays, road grime, and weather. Suitable for all tire types, it helps restore dull, faded tires to a showroom-quality finish.
Key Takeaways
- The Pro-Line Racing Badlands MX 1.9-inch set is built for the ARRMA Typhon GROM 4×4.
- You get four pre-mounted tires and Mach-10 Black wheels, so you do not need to glue tires before installation.
- The 2.82-inch height and 1.02-inch width give the GROM a taller, more aggressive footprint than a low-profile street tire.
- The motocross-style knobbies are best suited to loose dirt, loam, grass, and mud.
- The 12mm hex fit keeps installation simple for Typhon GROM 4×4 front or rear use, but you should still check clearance after mounting.
Before You Buy: Do not buy these only because another RC vehicle uses a 12mm hex. Tire height, tire width, wheel offset, body clearance, and suspension clearance still need to match your setup.
What Is the Pro-Line Badlands MX 1.9 Tire Set?
The Pro-Line Racing Badlands MX 1.9-inch set is a pre-mounted tire and wheel package for the Typhon GROM 4×4. It includes four Badlands MX all-terrain buggy tires already mounted on Mach-10 Black 1.9-inch wheels with 12mm hex hubs.
This setup is made for drivers who want less mounting work and more off-road bite. Instead of buying loose tires, separate wheels, tire glue, and inserts, you get a ready-to-install set designed for front or rear use on the Typhon GROM 4×4.
The main feature is the motocross-inspired tread. The larger knobs and open spacing help the tire dig into loose terrain, while the Mach-10 wheel gives the tire a sturdy 10-spoke base.
Who Should Buy It?
Best For
- Typhon GROM 4×4 owners who drive mostly on dirt, grass, loam, or damp backyard surfaces.
- Drivers who want a quick pre-mounted upgrade instead of gluing tires by hand.
- Bashers who prefer aggressive traction and a tougher off-road look over a smooth street setup.
Skip If
- You run mainly on pavement, because the knobby tread can wear faster on hard surfaces.
- You are building a high-speed setup that needs belted tires to control ballooning.
- You own a different RC vehicle and have not confirmed offset, tire size, body clearance, and suspension clearance.
Tread Design and Off-Road Traction
The Badlands MX tread uses a motocross-style knobby pattern, and that matters most when the ground is loose. On dirt, the tread blocks can bite into the surface instead of skating across it like a smoother street tire.
In mud or damp grass, the wider gaps between the lugs help reduce packed-in buildup. That does not make the tire unstoppable in deep sludge, but it does help you keep forward drive when the surface gets soft.
The 2.82-inch tire height also gives your Typhon GROM a little more rolling presence. For backyard ruts, short grass, and loose patches, that extra height can feel more forgiving than a lower-profile setup.
Mach-10 Wheels and Mounted Setup
The Mach-10 Black wheels are more than a visual upgrade. Each wheel uses a 10-spoke design and a 12mm hex, which matches the Typhon GROM 4×4 fitment listed for this tire set.
Because the tires arrive pre-mounted, you do not need to glue the tire bead before your first run. That saves time and lowers the chance of a messy mount, especially if you are newer to RC tire setup.
The mounted design also helps when you want a clean replacement set you can install quickly. You still need to seat each wheel correctly on the hex and tighten the wheel nut evenly before driving.
Fit and Compatibility
This package is made for the ARRMA Typhon GROM 4×4 and fits the front or rear positions. The 12mm hex is the key fitment detail, but it is not the only detail that matters.
The 1.9-inch wheel size and 2.82-inch tire height give the buggy a more aggressive stance. That can help on rougher surfaces, but you should test steering lock and suspension compression before hard driving.
Fitment gets more uncertain when you use the set on another 12mm hex vehicle. Even if the wheel mounts, the tire may still rub the body, suspension arms, or steering parts.
Setup Tips Before First Use
Install one wheel at a time and make sure the 12mm hex seats fully inside the wheel hub. Tighten the wheel nut evenly, then spin the tire by hand to check for wobble or rubbing before you set the car on the ground.
After installation, turn the steering fully left and right while the suspension is compressed by hand. This quick check helps you catch body rub before the tires load up under throttle or during a jump landing.
Pro Tip: After your first short run, recheck each wheel nut and look for fresh rub marks inside the body. Small GROM setups can show clearance issues only after the suspension moves under load.
Compatibility and Safety Notes
RC tire fit affects more than looks. A taller or wider tire can change steering feel, strain the drivetrain on high-grip surfaces, or rub when the suspension compresses.
Use these tires in open areas away from people, pets, and fragile objects. Knobby tires can throw small stones or dirt when the car accelerates on loose ground, so keep a safe distance during testing.
Do not treat the 12mm hex as a universal fit guarantee. Check tire height, tire width, wheel offset, body clearance, and suspension clearance before using this set on any vehicle other than the Typhon GROM 4×4.
[Products Worth Considering]
Monitor tire tread wear with a smart, color-coded depth gauge that shows clear condition ranges at a glance. The bar is range marked for fast, easy readings, helping you maintain safer traction and performance. Each gauge is portable with a pocket clip, and the set includes 20 units for daily use and sharing.
Suds Lab WB Premium Detailing Wheel Brush delivers a scratch-free clean using ultra-soft microfiber bristles that lift brake dust, dirt, and grime without swirling. The ergonomic non-slip handle helps you deep-clean rims, wheels, and tires with reduced hand fatigue while reaching tight contours. It’s reusable and machine washable for long-term detailing, and works across cars, trucks, SUVs, and motorcycles plus multi-purpose cleaning tasks.
This 62-inch extra-long car wash brush kit makes it easy to clean hard-to-reach areas on cars, trucks, SUVs, and RV roofs with lightweight, sturdy poles. It includes soft, non-scratch microfiber and bristles with protective bumpers to help prevent scratches while cleaning effectively. A rubber squeegee helps remove water stains quickly, plus a wheel/tire brush and absorbent towels for complete exterior detailing.
How It Performs in Real Use
On Loose Dirt
Loose dirt is where this tire set makes the most sense. The larger knobs help your Typhon GROM pull forward under throttle, and the open tread gives you more bite when turning on dusty ground.
On Grass and Backyard Terrain
On short grass, the 2.82-inch tire height helps the buggy roll over uneven patches with less hesitation. The tread can still load up in wet grass, but it is better suited to backyard terrain than a low, smooth street tire.
On Mud and Damp Ground
On damp soil or shallow mud, the open tread spacing helps the tire keep some grip instead of turning into a slick surface. Deep mud can still overwhelm a small RC buggy, so this is better for damp backyard runs than heavy mud bogging.
On Pavement
Pavement should be a light-use surface for these tires. The Badlands MX tread is built around dirt, mud, and grass traction, so long asphalt sessions can wear the knobs faster than off-road driving.
Cleaning and Maintenance
After muddy or dusty runs, let the tires dry and brush away packed dirt from the tread gaps. Avoid storing the car with wet debris stuck around the wheels, because grit can work into moving parts around the hub and suspension.
Check the tires after hard landings or repeated tumbles. Look for loose wheel nuts, uneven tire wear, rubbing marks, or signs that one wheel is not seated fully on the hex.
Pros and Cons
Pros
- Four pre-mounted tires and wheels reduce setup time.
- 12mm hex fitment is specific to the Typhon GROM 4×4 front or rear.
- Motocross-style knobs give strong bite on loose dirt, loam, grass, and mud.
- 2.82-inch tire height adds a more aggressive stance for backyard driving.
- Mach-10 Black 10-spoke wheels give the set a rugged, finished look.
Cons
- Knobby tread is not ideal for long pavement runs.
- Not the best choice for high-speed builds that need belted tire control.
- Fit on other 12mm hex vehicles still depends on offset, body clearance, and suspension clearance.
Is It Worth the Price?
The Pro-Line Badlands MX 1.9 set offers strong value for the price if you want a complete tire and wheel upgrade in one purchase. You are paying for four mounted tires, four Mach-10 wheels, Typhon GROM fitment, and a tread pattern built for loose terrain.
The value is strongest if you run your GROM in the yard, on dirt paths, or in mixed off-road areas. You get less value if your driving is mostly pavement, because the tread design is not built around smooth-surface wear.
For everyday backyard bashing, it is a smart buy because the install is quick and the traction upgrade is easy to feel. For speed-focused setups, a belted or street-focused alternative may be a better match.
How It Compares to Alternatives
If you want a more race-style tire for prepared dirt, the Pro-Line Hole Shot 3.0 1.9 pre-mounted Typhon GROM tires are worth comparing. If you drive mainly on street or hard surfaces, Pro-Line Vector 1.9 pre-mounted tires are a more surface-focused option.
JConcepts also offers Typhon GROM pre-mounted options such as Smoothie 2, Choppers, and Magma tires. The Badlands MX remains the better pick when your priority is aggressive all-terrain traction on loose backyard surfaces.
Are Badlands MX Tires Worth Buying?
Yes, the Badlands MX 1.9 tire set is worth buying for the right Typhon GROM 4×4 driver. It is best for loose surfaces, quick installation, and a tougher off-road look.
The most important buying question is where you drive. On dirt, grass, mud, and loam, the tread pattern makes sense. On pavement or high-speed builds, the same knobs become the main limitation.
That balance is why this earns an 8/10 rating. It is a strong, focused upgrade, but it is not a universal tire for every surface or every GROM build.
Frequently Asked Questions
Do the Pro-Line Badlands MX 1.9 tires fit the Typhon GROM 4×4?
Yes. This PRO1024610 set is listed for the ARRMA Typhon GROM 4×4 and can be used front or rear. You should still check clearance after installation, especially if your body, suspension, or steering setup has been modified.
Are these tires already glued to the wheels?
They are sold as a pre-mounted tire and wheel set. That means you do not need to mount loose tires to separate wheels before your first run.
What surfaces are best for the Badlands MX tread?
The tread is best for loose dirt, loam, mud, grass, and mixed backyard terrain. It can run on pavement, but pavement is harder on the tall knobs and is not the main reason to buy this set.
Can you use these on another 12mm hex RC vehicle?
Possibly, but 12mm hex size alone is not enough to guarantee fit. You also need to check tire height, tire width, wheel offset, body clearance, and suspension clearance.
Are these a good choice for brushless high-speed GROM builds?
They can be used for normal off-road driving, but they are not marketed as belted speed-run tires. If your build focuses on very high wheel speed, look for tires designed to control ballooning.
What comes in the package?
The package includes four Badlands MX 1.9-inch all-terrain buggy tires mounted on Mach-10 Black 1.9-inch 12mm hex wheels. No separate warranty, certification, or extra accessory claim was verified for this review.
Do these tires need special care after mud runs?
Brush out packed dirt from the tread gaps and check the wheel area after muddy runs. Grit around the hub or suspension can affect smooth movement if you leave it in place.
Who should skip the Pro-Line Badlands MX 1.9 set?
Skip it if you mostly drive on pavement, need a smooth street tire, or want belted tires for speed-focused runs. Also skip it for another RC vehicle until you confirm size, offset, and clearance.
The Bottom Line
The Pro-Line Racing Badlands MX 1.9-inch tire and Mach-10 wheel set is a strong upgrade if your Typhon GROM 4×4 spends most of its time on dirt, grass, mud, and loose backyard terrain. The 8/10 rating reflects its easy pre-mounted setup, specific Typhon GROM fit, and aggressive tread, balanced against weaker suitability for pavement and high-speed belted-tire use.
Buy it if you want more off-road bite without building a tire set from separate parts. Skip it if you need a street tire, a pure race tire, or a belted setup for high-speed runs.
[Products Worth Considering]
Black Magic Intense Foam Wheel & Tire Cleaner uses a high-foaming action to lift away dirt, grime, and brake dust without scrubbing. The color-changing formula helps show contaminants being dissolved as foam turns from white to brown. Safe for all wheel types and even wheel wells, it leaves a like-new, slick finish with a fresh cherry scent.
Replace worn tires quickly with this universal 4.80/4.00-8 tire and inner tube set designed for wheelbarrows and outdoor utility carts. The ribbed tread helps reduce turf damage while the natural rubber construction supports longer service life. Compatible with 15.5-inch outer diameter, 4-inch width, and 8-inch rim diameter wheels, it uses a straight TR-13 valve stem for easy installation. For best results, inflate with a manual pump and do not exceed 25 PSI.
The Milton S-693 straight foot dual head air chuck is designed for accurate tire pressure checks and quick, secure valve-core engagement with lock-on threads on both ends. With a 1/4" FNPT connection and a maximum 150 PSI rating, it’s built for use on inner duals and common vehicle tires, including trucks and RVs.
Related Articles
EOPOAYI 19×7-8 Mini Bike Tire Review
A rugged EOPOAYI 19x7-8 mini bike tire review reveals traction, durability, and fit details that could change your next off-road ride.
Read More
MaxAuto 16×8-7 ATV Tires Review
Jump into this MaxAuto 16x8-7 ATV Tires Review to see whether these rugged tires truly deliver on trails—and what you need to know next.
Read More
TRIBLE SIX 20×11-9 Tires Review
Built for ATVs, UTVs, mowers, and carts, TRIBLE SIX 20x11-9 tires deliver surprising traction—yet one detail may change everything.
Read More