Slime 50159 Smart Spair Ultra Review: Truck and SUV Flat Tire Repair and Inflator Kit
Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
A flat on a truck or SUV can be difficult to handle when you do not have a usable spare, enough shoulder space, or the tools for a wheel change. The Slime 50159 Smart Spair Ultra combines an 18 oz sealant cartridge with a 12V inflator to seal eligible tread punctures and restore pressure in about 15 minutes. It is easy to store and avoids lifting the vehicle, but it is only a temporary repair and cannot fix sidewall damage, a separated tire, or a large cut. This review helps you decide whether its speed and simple setup are worth the tradeoffs of using sealant.
Quick Verdict
Rating: 8.6/10, recommended with caveats
Best For: Truck and SUV drivers who want a no-jack emergency option for repairable tread punctures.
Bottom Line: The one-button air-and-sealant design is faster and less physically demanding than installing a spare. Its main tradeoff is that the repair is temporary, limited to small tread punctures, and requires prompt tire service.
Key Specifications
| Specification | Detail |
|---|---|
| Brand | Slime |
| Model | Smart Spair Ultra, part 50159 |
| Product type | Temporary flat-tire repair kit with sealant and inflator |
| Vehicle focus | Larger truck and SUV tires |
| Sealant quantity | 18 oz emergency tire sealant |
| Repair limit | Tread punctures up to 1/4 inch (6 mm) |
| Estimated repair time | About 15 minutes for the manufacturer’s standard test tire |
| Airflow | 0.70 CFM (19.8 LPM) at 0 PSI |
| Gauge range | 0 to 60 PSI (0 to 4 bar) |
| Power | 12V accessory outlet rated 15 amps or higher |
| Power-cord length | 13.9 ft (4.25 m) |
| Total reach | 16.3 ft (4.97 m) |
| TPMS compatibility | Manufacturer describes the sealant as tire-sensor safe |
| Refill | Slime 10202 cartridge for model 50159 |
| Warranty | Current manufacturer warranty: two years for the inflator and four years from manufacture for the sealant |
| Repair status | Emergency use only, remove sealant within 3 days or 100 miles |
Before You Buy: Check that your vehicle has a working 12V outlet rated at 15 amps or more and that the kit’s 60 PSI gauge covers your tire’s required pressure. This product is for small punctures in the tread area, not sidewall damage, bead leaks, blowouts, or a tire that has come off the rim.
[Products Worth Considering]
This portable cordless tire inflator delivers up to 160 PSI with fast 17 L/min airflow to help you quickly top up tires and get back on the road. It features dual power mode, running on a 21V rechargeable battery or a 12V DC adapter for convenient roadside use. An automatic shut-off with digital pressure gauge helps prevent overinflation, and a built-in LED light improves visibility in low-light conditions.
This AUTOWN flat tire repair kit is designed for quick, reliable puncture repairs using a plug kit and spiral probe tool to simplify installation. Built for durability and safe handling, it offers strong adhesion and flexibility to help maintain tire air tightness. With a portable storage case and a multi-vehicle approach, it’s suitable for cars, motorcycles, ATVs, tractors, lawn mowers, RVs, jeeps, and trucks.
The JACO FlowPro Tire Inflator measures, inflates, and airs down tires up to 100 PSI with battery-free operation and ±2% accuracy after calibration. It features a glowing pressure dial for night visibility, a heavy-duty steel build with a hybrid hose, and a precision push-to-inflate thumb trigger. The patented Lightning Air Chuck locks on for a secure seal, and the kit includes quick-connect hardware for easy inline use with your air compressor.
Slime 50159 Smart Spair Ultra
What Is the Slime 50159 Smart Spair Ultra?
The Smart Spair Ultra 50159 is an all-in-one roadside kit for truck and SUV tires. Its inflator pushes the included 18 oz sealant through the valve stem, then adds air until the tire reaches the pressure shown on your vehicle’s tire placard. You do not need to remove the wheel, use a jack, or handle a separate valve-core tool.
The kit uses a smart dial with a sealing zone and a 0 to 60 PSI scale, so you can see when sealant is moving into the tire and when the system changes to inflation. The inflator, hose, power cord, and replaceable cartridge store in a compact hard case.
Who Should Buy It?
Best For
- Truck or SUV drivers without a full-size spare
- Drivers who cannot safely or comfortably change a wheel roadside
- Road-trip, commuting, and work-vehicle emergency storage
Skip If
- Your tires require more than 60 PSI
- You want a permanent repair or a reusable air-only compressor
- You commonly face sidewall cuts, bead damage, or severe off-road tire failures
Feature-by-Feature Review
One-Button Sealant and Inflation
The main advantage is its combined flow path. After you attach the hose and connect power, one button starts the sealant-and-air cycle. This reduces the number of loose parts you must manage beside traffic and removes the lifting required for a spare-tire change.
The 15-minute claim is based on a standard 275/65R18 test tire inflated from 0 to 35 PSI. A different tire size, low voltage, cold weather, or an imperfect valve connection can increase the time.
Truck and SUV Inflation Power
The inflator delivers 0.70 CFM at 0 PSI and uses a 12V accessory outlet. Its 13.9 ft power cord and 16.3 ft total reach are useful on longer vehicles because the case can stay on the ground while the hose reaches the tire.
The analog gauge stops at 60 PSI. That range works for many light-duty trucks and SUVs, but it may not cover some heavy-duty applications. Always use the cold-tire pressure on the driver-door placard or owner’s manual, not the maximum pressure molded into the tire sidewall.
Puncture Sealing and TPMS
Slime states that the emergency sealant can close tread punctures up to 1/4 inch (6 mm) and is safe for tire-pressure sensors, tires, and rims. It cannot rebuild damaged cords, seal a torn sidewall, correct a bent wheel, or make a tire safe after it has been driven while flat.
Tell the tire technician that sealant was used. The manufacturer says the temporary formula should be removed within 3 days or 100 miles, whichever comes first.
Case, Cord Storage, and Refill Design
The protective hard case keeps the inflator, hose, cord, and cartridge together. That matters in a cargo area where smaller tools can shift or disappear under luggage. After use, you can replace the empty cartridge with Slime refill part 10202 instead of replacing the entire kit.
Correct refill selection matters. The 10202 cartridge is made for the truck/SUV model 50159, while the smaller 10201 refill is for the car/trailer model 50158.
Pro Tip: Before a long trip, confirm the sealant date code, test the vehicle’s 12V outlet, and practice locating the hose, power cord, and on/off button. A two-minute dry run can prevent confusion during a real roadside emergency.
How It Performs in Real Use
Highway Shoulder Emergency
The kit can shorten your exposure beside traffic because it does not require loosening lug nuts or placing a jack under the vehicle. Move as far from traffic as possible, switch on the hazards, and use the kit only when the location is safe. If the tire has visible structural damage or the vehicle is in a dangerous position, call roadside assistance instead.
Road Trips Without a Spare
For vehicles supplied with no spare tire, the 50159 gives you a way to address a small tread puncture and reach a tire shop. It is not equal to carrying a full-size spare because it cannot handle every failure, but the compact case takes far less cargo space.
Work Trucks and Larger SUVs
The longer cord and truck-focused inflator are better suited to larger tires than the 50158 car/trailer version. The 60 PSI ceiling remains the key compatibility check for heavier trucks, trailers, and load-range tires.
Cold or Hot Weather Storage
Slime lists a low freezing point of 5°F (-15°C) and a high separation point of 122°F (50°C) for the sealant. Inspect the cartridge and date code regularly, especially when the vehicle is stored in severe heat or cold.
How to Use It Correctly
- Move outdoors or to an open, well-ventilated location. Set the parking brake and place the transmission in Park, or neutral for a manual transmission.
- Inspect the tire. Do not use the kit for sidewall damage, a large cut, exposed cords, a damaged wheel, or a tire separated from the rim.
- Remove the air/sealant hose from the case and screw it securely onto the tire valve stem.
- Start the vehicle, then plug the kit into a 12V outlet rated at 15 amps or higher. Never start the vehicle while the kit is already plugged in.
- Place the case upright on a hard, clean surface. Press the on/off button and watch the gauge move through the sealing zone and into the airing zone.
- Inflate to the pressure listed on the vehicle placard. Turn the unit off, disconnect the hose and power plug, then close the case.
- Drive 2 miles at less than 25 mph to spread the sealant, then stop safely and recheck pressure.
- Go to a qualified tire shop promptly and have the sealant removed within 3 days or 100 miles.
Do not operate the inflator continuously for more than 15 minutes. Let it cool for about 25 minutes between uses, keep it out of children’s reach, and never leave it running unattended.
Compatibility and Safety
This kit is intended for highway-use truck and SUV tires with repairable tread punctures. It is not a general solution for ATVs, lawn equipment, tube-type tires, sidewall damage, or every commercial truck tire. Confirm your tire type, required PSI, and 12V outlet rating before relying on it as your only backup.
Operate the kit outside or in a well-ventilated area. The inflator becomes hot, so leave it on the ground and do not hold it while running. Avoid skin and eye contact with the sealant, use protective gloves and eyewear when practical, and follow the label and manual for cleanup and disposal.
[Products Worth Considering]
This roadside assistance kit helps drivers and passengers in urgent situations after an accident or breakdown, providing practical support while waiting for help. It includes a lightweight, compact tire inflator for fast inflation of standard vehicle tires, plus reinforced jumper cable protection for safer handling. Ideal for winter weather, road trips, camping, and travel, with everything stowed neatly in a trunk bag.
This portable cordless tire inflator delivers fast, efficient inflation for cars, motorcycles, bikes, and sports balls with a digital pressure gauge. Use the one-click PSI preset with auto shut-off for accurate, hands-free topping to your target pressure up to 150 PSI. It’s compact and rechargeable with a built-in emergency LED light plus valve adapters and accessories for quick, ready-to-go use.
What Buyers Say
Buyer feedback is generally positive about the simple operation, compact case, and ability to restore mobility after a small puncture. The most useful critical comments mention difficulty sealing the screw-on hose connection, tight cord storage, and confusion about switching between inflation modes.
The strongest pattern is that the kit works best when you read the instructions before the emergency and confirm the hose is fully seated on the valve. It is less satisfying for buyers who expected a permanent repair or a conventional compressor with unrestricted air-only use.
Overall Sentiment: Positive, with practical setup caveats

Pros and Cons
Pros
- Combines 18 oz of sealant and inflation in one case
- Repairs eligible tread punctures without a jack or wheel removal
- 13.9 ft cord and 16.3 ft total reach suit larger vehicles
- 0 to 60 PSI smart dial shows sealing and inflation progress
- Replaceable 10202 cartridge extends the kit’s service life
Cons
- Temporary repair must be professionally serviced soon
- Cannot repair sidewalls, large cuts, bead leaks, or structural damage
- 60 PSI gauge may not suit some heavy-duty tires
Is It Worth the Price?
The Smart Spair Ultra 50159 sits in the mid-range for a complete sealant-and-compressor kit. Its value comes from the truck-focused airflow, long reach, hard case, gauge, and replaceable cartridge rather than from being the cheapest way to carry air.
It is worth considering when you drive a larger vehicle without a spare or want to avoid roadside wheel changes. It is less compelling if you already carry a full-size spare and capable compressor, or if you need a reusable tool for routine inflation more than an emergency sealant system.
How It Compares to Alternatives
The Slime 50158 Smart Spair Ultra is the smaller car/trailer version, with a 14 oz cartridge and a shorter claimed repair time. The 50159 makes more sense for truck and SUV tires because it uses the larger cartridge and truck-focused inflator.
An AIRMAN ResQ Pro+ or a separate 12V compressor paired with a plug kit may offer more flexible inflation or repair options. Those setups can require more steps and tire-repair skill. The 50159 is the simpler choice when one-button emergency mobility matters most.
Why Customers Choose
You choose the Slime 50159 when compact storage, quick setup, and avoiding a roadside wheel change matter more than having a permanent repair. The hard case keeps the parts organized, the gauge guides the process, and the refill system lets you restore the kit after use.

Frequently Asked Questions
Can the Slime 50159 repair a sidewall puncture?
No. It is intended for punctures up to 1/4 inch (6 mm) in the tire’s tread area. Sidewall cuts, bulges, exposed cords, bead damage, and blowouts require professional service or a spare tire.
Is the repair permanent?
No. Slime describes it as an emergency repair and says the sealant should be removed within 3 days or 100 miles. Have the tire inspected and repaired or replaced by a qualified technician as soon as possible.
Will it work with TPMS sensors?
The manufacturer describes the sealant as tire-sensor safe. Tell the tire shop that sealant was used so the tire, wheel, valve, and sensor can be cleaned and inspected correctly.
Can I use the inflator without adding sealant?
The kit’s controls may allow air-only operation, but its primary purpose is the combined emergency repair cycle. For routine pressure checks and frequent top-offs, a dedicated compressor is easier to use and avoids accidental sealant deployment.
Which refill fits the truck and SUV kit?
Use Slime refill part 10202 for the Smart Spair Ultra 50159. Do not substitute the 10201 car/trailer cartridge because it is designed for model 50158.
How long can the inflator run continuously?
Do not run it continuously for more than 15 minutes. The manual recommends allowing the unit to cool for about 25 minutes before another use.
What warranty applies to the kit?
Slime’s current warranty page lists two years from purchase for the inflator and four years from manufacture for the sealant in flat-tire repair kits. Keep your proof of purchase and check the date code on the cartridge.
Who should not rely on this as their only backup?
Drivers with tires above the 60 PSI gauge range, frequent severe off-road damage, tube-type tires, or no compatible 12V outlet should carry another solution. A spare tire and roadside assistance cover more failure types.
The Bottom Line
The Slime 50159 Smart Spair Ultra is a strong emergency choice for truck and SUV drivers who want a compact, no-jack response to a small tread puncture. Buy it for the simple air-and-sealant process and truck-focused reach, but skip it if you need a permanent repair, pressure above 60 PSI, or protection from sidewall and structural failures.








