Toyota Tundra Spare Tire Size and Specs: What Comes Under the Bed
Choosing the right spare tire for a Toyota Tundra is not just about fitting a tire under the bed. The spare needs to match the truck’s rolling diameter, load needs, wheel clearance, and the tire information placard for your exact trim. This is especially important on 4WD models and trucks with the TRD Off-Road Package.
Quick Answer
For a 2024 Toyota Tundra Platinum with the TRD Off-Road Package, the factory road tire is 265/60R20, not 285/65R20. Toyota lists the 2024 Tundra with a full-size spare mounted under the body, but the safest spare choice is the size shown on your door-jamb tire placard or an approved full-size match with the same overall diameter and load rating.
Key Takeaways
- A 2024 Tundra Platinum with the TRD Off-Road Package uses 265/60R20 Falken Wildpeak all-terrain tires from the factory.
- 285/65R20 is an aftermarket upsizing choice, not the factory spare or factory Platinum TRD Off-Road tire size.
- The best spare is a full-size tire that closely matches the tires already on the truck in overall diameter, load rating, and safe wheel fitment.
- Always confirm your tire size on the driver-door placard, the tire sidewall, and the owner’s manual before buying a spare.
- Check spare tire pressure, tread, age, hoist operation, and tools before long trips or off-road travel.
At a Glance
| Time Required | 10–20 minutes to inspect the spare; longer if test-fitting an aftermarket size |
| Difficulty | Easy for inspection; moderate for aftermarket spare fitment |
| Tools Needed | Tire pressure gauge, tread-depth gauge, tape measure, spare lowering tools, jack, lug wrench, and torque wrench |
| Cost | Free for inspection; replacement tire and wheel cost varies by size, brand, and wheel type |
What’s the Stock Spare Tire Size for Your Tundra?
The most accurate answer is: match the tire size listed for your exact Tundra on the driver-door tire placard. Toyota’s official 2024 Tundra brochure lists the truck with a full-size spare mounted under the body, but the exact spare setup can depend on trim, package, and wheel configuration.
For the specific truck many owners ask about, the 2024 Toyota Tundra Platinum with the TRD Off-Road Package uses 265/60R20 Falken Wildpeak all-terrain tires from the factory. That means a matching full-size spare should stay close to the same overall diameter and load rating. A 285/65R20 tire is much taller and should be treated as an aftermarket upgrade, not the stock spare recommendation.
Warning: Do not buy a spare based only on wheel diameter, such as “18-inch” or “20-inch.” Tire size, overall diameter, load rating, wheel offset, bolt pattern, brake clearance, and underbody hoist clearance all matter.
[Products Worth Considering]
Universal magnetic jack pad with aluminum grooved design to protect vehicle pinch welds during lifting. Durable nylon pad inserts are upgraded and secured with screws to resist damage and keep in place. Designed to fit most single vehicle pinpoint welds for safer, stable jacking when changing tires, repairs, or performing oil changes.
This spare tire tool kit is designed for the 2004 to 2018 Ford F-150 to help you loosen and tighten wheel lug nuts and manage the spare tire and provided jack functions from underneath the vehicle. It includes the lug nut wrench and extension pieces plus a convenient storage carrying case for organized transport. The jack itself is not included.
This universal spare tire mount carrier holder is built for utility trailers and boat trailers, offering a secure fit for 4, 5, and 6 lug wheels. It supports multiple bolt pattern sizes and a heavy-duty load capacity while resisting rust with a durable finish. The design allows easy installation and lets you choose the steel beam height for a better fit.
2024 Toyota Tundra Factory Tire Sizes by Trim
| Tundra Trim / Package | Factory Tire Size | Spare Guidance |
| SR | 245/75R18 all-season | Use a full-size spare that matches the placard size and load rating. |
| SR5 | 265/70R18 all-season; TRD Off-Road package may use 265/70R18 all-terrain | Match the installed tire’s overall diameter, especially on 4WD models. |
| Limited, Platinum, 1794 Edition | 265/60R20 all-season; TRD Off-Road package uses 265/60R20 all-terrain | For Platinum TRD Off-Road, start with 265/60R20 as the factory-size reference. |
| TRD Pro | 285/65R18 Falken Wildpeak all-terrain | Do not confuse this TRD Pro size with Platinum TRD Off-Road sizing. |
| Capstone | 265/50R22 all-season | Confirm wheel and brake clearance before using any alternate spare wheel. |
The tire placard on your truck always wins over a generic online recommendation. If a previous owner changed wheel or tire sizes, match the spare to the tires currently on the truck while keeping the setup safe for the drivetrain and suspension.
Why Proper Tire Size Matters for Performance and Safety
Proper spare tire size matters because your Tundra’s stability control, traction control, ABS, 4WD system, and differential all depend on tires rotating at predictable speeds. A spare that is much shorter or taller than the other tires can change the rolling speed at one corner of the truck.
That does not mean every spare must use the same wheel diameter. A full-size spare on an 18-inch wheel can be close in overall diameter to a 20-inch road tire if the sidewall height is different. What matters most is the overall tire diameter, load capacity, and safe wheel fitment.
A 265/60R20 tire is about 32.5 inches tall, while a 285/65R20 is about 34.6 inches tall. That difference is too large to call 285/65R20 a direct stock-size spare for a 2024 Platinum TRD Off-Road.
When checking a spare, look at these items:
- Tire size: Match the placard or the current full-size tire setup.
- Load rating: Use a tire with a load index suitable for your Tundra and how you use it.
- Wheel fitment: Confirm bolt pattern, hub fitment, offset, brake clearance, and lug-seat type.
- Overall diameter: Keep the spare close to the other tires to reduce drivetrain stress.
- Tire pressure: Follow the truck’s tire placard and owner’s manual, not the maximum PSI molded on the tire sidewall.
Note: Toyota’s owner information for the 2024 Tundra reminds owners to inspect tires for wear and to check the spare tire condition and pressure if the spare is not rotated into use.
Should You Upgrade to a Full-Size Spare?
For most Tundra owners, a full-size spare is the best choice. Toyota already lists the 2024 Tundra with a full-size underbody spare, which is a strong advantage over trucks and SUVs that rely on compact temporary spares or sealant kits.
A true full-size spare gives you more flexibility if you get a flat during towing, hauling, or off-road driving. It also helps you avoid the speed, distance, and drivetrain limitations that often come with compact spare tires.
However, “full-size” should not be confused with “same wheel design.” Your spare may be mounted on a steel wheel instead of a matching alloy wheel. That is usually fine for emergency use as long as the tire size, load rating, and wheel fitment are correct.
Pro Tip: If you upgraded your Tundra from stock tires to a larger size, upgrade the spare at the same time. A stock spare may no longer be a good match once your four road tires are taller.
[Products Worth Considering]
Secure a full-size spare on your trailer with this powder-coated steel spare tire mount bracket. It fits most 4-, 5-, and 6-lug wheel bolt patterns and mounts to trailer tongues up to 4 in wide and 5 in tall. Built for reliable carry with a max 150 lb load rating and includes zinc-plated hardware for straightforward installation.
This side-mounted U-bolt spare tire bracket helps keep a trailer spare wheel secure and protected while you travel. It supports trailer frames up to 2–3 inches wide and fits up to 15-inch tires for 4- or 5-lug wheels. The galvanized steel threaded carrier is built for long-lasting corrosion resistance and installs easily with included lug nuts and U-bolt.
50,000 mile warranty
How to Fit Larger Tires Under Your Tundra Bed
Larger spare tires may fit under some Tundra setups, but fitment is not guaranteed. Tire width, tread pattern, wheel offset, hoist angle, heat shields, hitch parts, suspension clearance, and the spare tire carrier all affect whether the tire can be stored safely.
[Products Worth Considering]
【Fit for】 The spare tire winch with offset cable is compatible with 2000-2006 Toyota Tundra Extended Cab Pickup, 2004-2006 Toyota Tundra Crew Cab Pickup, 2000-2006 Toyota Tundra Standard Cab Pickup.
Durable strong rustproof automotive grade steel, tubing instead of soil designed
[Compatible with Toyota]: Compatible with Tundra 2000-2006 Extended Cab Pickup, 2004-2006 Crew Cab Pickup, 2000-2006 Standard Cab Pickup
Considerations for Tire Size
Before buying a larger spare, compare the new tire to the tires already on your truck. A common aftermarket 35-inch tire, such as a 35×12.50, is much larger and wider than the factory 265/60R20 tire used on a 2024 Platinum TRD Off-Road Package.
That larger tire may help match an aftermarket lift-and-tire setup, but it can also create clearance problems under the bed. It may sit too close to the exhaust, hitch, leaf or suspension components, bed structure, or spare hoist hardware.
Modifications for Fitment
Some owners report fitting larger spares under the truck after trimming or repositioning parts, but cutting or grinding factory brackets is not a casual maintenance job. Any modification to the spare tire carrier should keep the spare secure during hard braking, off-road vibration, and rear impacts.
Warning: Do not cut, grind, or bend spare-tire mounting parts unless you understand the load path and have the work inspected by a qualified technician. A loose underbody spare can become a serious road hazard.
Test Fitting Tips
Use this process before relying on a larger spare:
- Lower the factory spare and inspect the hoist, cable, wheel plate, and contact points.
- Measure the diameter and section width of the tire you want to carry.
- Test-fit the wheel and tire under the truck without forcing the hoist.
- Check clearance around the hitch, exhaust, suspension, bed, and rear axle area.
- Crank the spare fully into position and confirm it sits tight without rocking.
- Drive a short distance, recheck the spare, and confirm nothing shifted or rubbed.
- Practice lowering it again so you know it can be removed on the roadside.
If the spare does not raise smoothly or sits at an unsafe angle, do not force it. Carrying an oversized spare in the bed may be safer than storing it poorly under the truck.
Tundra Spare Tire Maintenance Practices
A spare tire only helps if it is inflated, accessible, and safe to drive on. Include the spare in your normal tire checks, especially before towing, hauling, trail driving, or long highway trips.
- Check pressure monthly: Use a reliable gauge and follow the pressure listed for your truck.
- Inspect tread: Look for low tread depth, uneven wear, embedded objects, or exposed cords.
- Check tire age: Read the DOT date code on the sidewall and replace old or cracked tires even if the tread looks unused.
- Inspect the sidewall: Look for cracks, bulges, cuts, dry rot, or weather damage.
- Operate the hoist: Lower and raise the spare occasionally so the mechanism does not seize.
- Verify tools: Confirm the jack, lug wrench, lock key, spare lowering tools, and wheel chocks are in the truck.
- Torque correctly: After installing a spare, tighten lug nuts in the correct pattern and have torque checked with a torque wrench.
The National Highway Traffic Safety Administration TireWise program recommends regular tire pressure, tread, and rotation checks. The U.S. Tire Manufacturers Association also recommends checking tire pressure at least monthly and before long trips, including the spare tire.
Frequently Asked Questions About Tundra Spare Tire Selection?
The right spare tire depends on your exact Tundra setup, not just the model year. Use these checks before buying:
- For a stock 2024 Platinum TRD Off-Road: Start with 265/60R20 as the factory tire-size reference.
- For a TRD Pro: Do not copy Platinum sizing; the 2024 TRD Pro uses 285/65R18 from the factory.
- For lifted trucks: Match the spare to the upgraded road tires, not the original door placard alone.
- For 4WD use: Keep tire diameter as consistent as possible and avoid extended driving with a mismatched spare.
- For off-road trips: Carry a full-size spare, a working jack setup, a tire repair kit, and an air compressor if your route is remote.
Community Experiences With Spare Tire Choices
Tundra owners often share different spare tire setups based on how they use the truck. Daily drivers usually want a simple factory-size spare. Off-road owners may want a full-size spare that matches larger all-terrain tires. Overlanding and towing owners often care most about reliability, load rating, and quick roadside serviceability.
Common Spare Tire Sizes
These are the sizes most relevant to 2024 Tundra spare conversations:
- 265/60R20: Factory reference size for 2024 Platinum with the TRD Off-Road Package.
- 265/70R18: Common factory 18-inch size on some SR5 and TRD Off-Road configurations.
- 285/65R18: Factory TRD Pro size, not the Platinum TRD Off-Road size.
- 265/50R22: Factory Capstone size.
- 35×12.50: Popular aftermarket off-road size, but it requires careful fitment checks and may not fit safely in the stock spare location.
User Modifications and Solutions
Some owners carry a matching spare on the factory underbody hoist. Others move the spare into the bed, use a bed-mounted carrier, or install an aftermarket swing-out carrier for larger tires. Each option has trade-offs.
| Spare Setup | Best For | Main Caution |
| Factory-size full spare | Stock or near-stock trucks | Must be inflated and in usable condition. |
| Matching oversized spare | Lifted or off-road builds | May not fit under the bed without safe carrier changes. |
| Bed-mounted spare | Large tires and trail use | Reduces bed space and must be tied down securely. |
| Rear swing-out carrier | Overlanding builds | Adds weight and changes rear access/parking clearance. |
Off-Road Performance Considerations
Off-road driving increases the value of a matching full-size spare. Rocks, trail debris, low tire pressure, and sidewall cuts can leave you far from a tire shop. If your Tundra is used off-road, build your spare setup around the worst place you might have to change a tire, not the easiest place.
Before a trail trip, make sure the spare is reachable when the truck is loaded. Bed racks, camping gear, hitch accessories, and recovery equipment can block access to the spare or tools if you do not plan ahead.
Frequently Asked Questions
What spare tire size should a 2024 Tundra Platinum TRD Off-Road use?
Use 265/60R20 as the factory tire-size reference for a 2024 Tundra Platinum with the TRD Off-Road Package. Confirm the final spare choice against your door-jamb tire placard, current tire sidewalls, and owner’s manual.
Is 285/65R20 the stock spare size for a 2024 Tundra Platinum TRD Off-Road?
No. A 285/65R20 tire is an aftermarket upsizing size. It is about 34.6 inches tall, which is much taller than the factory 265/60R20 tire used on the 2024 Platinum TRD Off-Road Package.
Does the 2024 Toyota Tundra come with a full-size spare?
Yes. Toyota’s 2024 Tundra brochure lists a full-size spare mounted under the body across the lineup. Still, inspect the actual spare on your truck because wheel style, tire condition, and prior owner changes can vary.
Can I use an 18-inch spare on a Tundra with 20-inch wheels?
Possibly, but only if the tire’s overall diameter, load rating, wheel fitment, brake clearance, and lug compatibility are correct. Wheel diameter alone does not tell you whether the spare is safe to use.
Can a 35-inch spare fit under a Toyota Tundra?
Some owners have made larger spares fit, but a 35-inch tire is not guaranteed to fit safely in the stock underbody spare location. Test-fit it carefully and avoid unsafe changes to the spare hoist or mounting structure.
How often should I check my Tundra spare tire?
Check the spare tire pressure, tread, sidewall, and hoist at least monthly and before long trips. Also confirm that the jack, lug wrench, spare lowering tools, and any wheel lock key are in the truck.
Conclusion
The right Toyota Tundra spare tire is the one that safely matches your truck’s tire placard, current tire diameter, load needs, and wheel fitment. For a 2024 Tundra Platinum with the TRD Off-Road Package, the factory tire-size reference is 265/60R20. A 285/65R20 may work only as part of a planned aftermarket setup, not as the default stock spare choice.
Before you head out, check your spare the same way you check your four road tires. A full-size spare is valuable only when it is properly inflated, in good condition, securely mounted, and easy to access when you need it.
Sources
- Toyota 2024 Tundra eBrochure — factory tire sizes, TRD Off-Road tire information, TRD Pro tire size, and full-size underbody spare listing.
- Toyota 2024 Tundra Owner’s Manual: Tires — tire inspection, treadwear, and spare tire pressure/condition guidance.
- Toyota 2024 Tundra Owner’s Manual: Wheels — wheel precautions and Toyota wheel guidance.
- NHTSA TireWise — tire safety, tire pressure, tread, maintenance, and recall guidance.
- U.S. Tire Manufacturers Association Tire Care Essentials — monthly pressure checks, long-trip checks, and spare tire care.
Related Articles
Toyota Tundra Tire and Wheel Package: What to Consider Before Buying
Unlock the secrets to choosing the perfect tire and wheel package for your Toyota Tundra—essential tips await to enhance your ride.
Read More
Do Bigger Tires Void a Toyota Tundra Warranty? Magnuson-Moss Act Explained
Bigger tires might not void your Toyota Tundra warranty, but understanding the Magnuson-Moss Act is crucial—discover how to protect your investment effectively.
Read More
Toyota Tundra Tire Rack Setup: Garage Storage Ideas for Seasonal Sets
Better tire storage for your Toyota Tundra awaits—discover essential tips to maximize space and protect your seasonal sets in the garage!
Read More